Im after 2 rings made up
ID- 103mm
OD 111mm
thickness about 2-3mm.
Sizes are measure but still what i call approx, due to my dodgy veniers.
I'd be happy to drop off the 2 parts so the spacers can be made exact.
Mild steel preferred, but i reckon any metal should do the trick
Its actually for mounting GQ rear rotors onto MQ axles.
Who knows, You could make a small buck making a few at once.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i need a small and easy Metal lathe work done in sydney.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho
rockcrawler31 wrote:can you suggest a reasonable laser cutters in western sydney? i need to get some 12mm plate cut for some swaybar armsrustys wrote:Get them laser cut.
http://www.lasermade.com.au/
http://maps.google.com.au/maps?hl=en&cl ... CCkQtQMwAA
Bazzle
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho
Who is online
Users browsing this forum: No registered users and 1 guest