Allied Beadlocks?

[SIM79]

Allied have started making beadlocks. Has anyone priced a set?

http://www.alliedwheels.com.au/4x4-alloy-wheels-1.htm

[perko88]

I got a quote fom a local tire shop and came in at 390 each, might as well buy brand new pro comps, bead locks and pay someone to weld them on and still come out in front. The bloke at the tire shop also said that the allied ones still arent road legal which i personally think would be the only reason you would look at them

[nastytroll]

At that price I would pay extra and get walker evans

[NQCalais]

I ordered a set of the "Lockjaw" fakelocks off Allied through my local dealer in January - still haven't got them yet. Supposed to be arriving in about 2 more weeks but I'll wait & see. Costing about $167.00 each rim.

The delay has apparently been caused by the ring that gets welded in. Wrong size or something, but 3 months? Allied must do the welding themselves once the rims and rings arrive here.

[flexytj]

there was an ebay shop selling allied beadlocks a few weeks ago in aus

[SIM79]

I got a quote fom a local tire shop and came in at 390 each,

What size rims?

[LOCKEE]

I ran them in 15 x 8 for a couple of years. Some key differences to weld in ones.

Nutserts,

32 bolts.

Mine never leaked.

Will run another set.

[sierrajim]

Mine have been going well attached to the zook that's barely moved for two years, only one has dropped air pressure.

The same wheels were on the two cars prior and worked very well on both.

[SIM79]

I ran them in 15 x 8 for a couple of years. Some key differences to weld in ones.

Nutserts,

32 bolts.

Mine never leaked.

Will run another set.

Mine have been going well attached to the zook that's barely moved for two years, only one has dropped air pressure.

The same wheels were on the two cars prior and worked very well on both.

Are you running the Allied Australian rims or the Allied U.S rims as they are two different companies?

http://www.alliedwheel.com/wheels.php?cat=Competition Beadlocks

[perko88]

I got a quote fom a local tire shop and came in at 390 each,

What size rims?

15x8

[bogged]

I got a quote fom a local tire shop and came in at 390 each,

What size rims?

15x8

[sierrajim]

I ran them in 15 x 8 for a couple of years. Some key differences to weld in ones.

Nutserts,

32 bolts.

Mine never leaked.

Will run another set.

Mine have been going well attached to the zook that's barely moved for two years, only one has dropped air pressure.

The same wheels were on the two cars prior and worked very well on both.

Are you running the Allied Australian rims or the Allied U.S rims as they are two different companies?

http://www.alliedwheel.com/wheels.php?cat=Competition Beadlocks

These

[/img]

[LOCKEE]

Same US & Australia

[SIM79]

I ran them in 15 x 8 for a couple of years. Some key differences to weld in ones.

Nutserts,

32 bolts.

Mine never leaked.

Will run another set.

Mine have been going well attached to the zook that's barely moved for two years, only one has dropped air pressure.

The same wheels were on the two cars prior and worked very well on both.

Are you running the Allied Australian rims or the Allied U.S rims as they are two different companies?

http://www.alliedwheel.com/wheels.php?cat=Competition Beadlocks

These

[/img]

Same US & Australia

http://www.alliedwheel.com/wheel.php?name=Black Daytona Beadlock

The pic above is the U.S version and these rims are know for being great quality and I am sure they are made in the U.S., the Australian Allied doesn't have one rim thats the same style as the U.S. Allied and the Australian Allied rims are made in Asia.
[/img]

[NQCalais]

Says here that they use a combination of stuff from Asia and the US, but those Competition ones don't look the same as the ones above either...

[Ruffy]

The competition beadlocks are not being imported by the Allied wheel importers at the moment.
This is straight from the importer/distributor.

[def90]

if they are the same as the yankee allied/raceline rims, i've got some alloy beadlocks and happy so far, heaps of guys in the KOH run them.

[img][img]http://i325.photobucket.com/albums/k398 ... to0028.jpg[/img][/img]

[brooksy]

That's the sh!t Sam !!!!

Racelines are what I am looking at but with alloy rings.


PM me what they cost you champ





brooksy

[def90]

pm sent bud,

i'll get the alloy rings soon, but they were outta my reach when i ordered the rims, if you want alloy rings also have a look at HD trail ready rims, very nice and cost comparative.

i'll make it to C44F one day to get you to weave some magic for me!!

Sam

[perko88]

I got a quote fom a local tire shop and came in at 390 each,

What size rims?

15x8

thats what i said, give or take a few @#*!

[SIM79]

if they are the same as the yankee allied/raceline rims, i've got some alloy beadlocks and happy so far, heaps of guys in the KOH run them.

Who sells these over here?

[Auto-Craft]

I had the raceline beadlocks in 17 x 10 running 37's and 39.5's and had no end of trouble with deformed steel rings, and broken bolts, even L9 bolts were requiring replacement often.

We looked at alloy rings that Allied [US] were going to supply, but I went to Robby Gordon Beadlocks and L9 bolts instead when they offerred to take the rims back once they conceded that they werent successfull on 6000 # + trucks.

[def90]

if they are the same as the yankee allied/raceline rims, i've got some alloy beadlocks and happy so far, heaps of guys in the KOH run them.

Who sells these over here?

no one s far as i know, got them off a fella from pirate.

the steel beadlock is a bit thin, see how they go.

re the bolts, i've had to replace them as they sent bolts that were too long oh yeah and got the most of the rest rim wrong too, i had to get them machined to fit - at their expense as they were the 1st rover alloy that they had done. but stupidly on their behalf they make steelies for rovers so they had all the info on pcd's etc.

[napsta]

I run the Raceline Monster beadlocks on my KOH car. My understanding is that they are not released in Aus yet, but soon will be - not sure if it will be through Allied Aus, or if they are even related to Allied USA.

I think they are a great wheel, and we have put them through some serious abuse. I have bent the metal rings a couple of times, but this was when I was racing on a flat tyre







I think the alloy rings are a good upgrade, and hopefully when they are released here they will be at a good price point.

In terms of Autocraft, my buggy weighs a bit more than half yours, so yes, my use may not be comparable, but I guarantee we are putting them in some of the harshest conditions ever. Dave Cole's car is close to 6000 pounds and he seems to be using them successfully.

I'll try and find out about release info for the wheels in Aus

Ben

[def90]

if they do get released over here i'm sure they will be big $, like walker evans, etc they'll be yet another product which will be 50-70% cheaper bought and delivered from across the pond, the beadlock ring has the same rolled edge on the 1st pic (aussie raceline/allied) as the yankee ones which makes you think they must be related as i haven't seen that ring on other beadlocks.

[Auto-Craft]

I run the Raceline Monster beadlocks on my KOH car. My understanding is that they are not released in Aus yet, but soon will be - not sure if it will be through Allied Aus, or if they are even related to Allied USA.

In terms of Autocraft, my buggy weighs a bit more than half yours, so yes, my use may not be comparable, but I guarantee we are putting them in some of the harshest conditions ever. Dave Cole's car is close to 6000 pounds and he seems to be using them successfully.

I'll try and find out about release info for the wheels in Aus

Ben

Ben,

We ran up to 8000 # on ours, and long km even when checking them aften, was when they problem would show, as the bolt heads would break off when you were checking them, and on one 100km road trip, half of one ring came off as they broke.

In dealing with Allied U.S with the problem, as Performance Metals were bringing in the rims at the time, and we were going to dist in Vic, we worked with them in trying to fix the issue, but they baulked at supplying, or paying for bolts, or alloy rings at the time, and we werent going to sell them if we couldnt be 100% confident they would do the job.

They had massive inner beads and were a great rim otherwise, just the steel ring was the problem.

The ideal set up would be a inner and outer interlocking step on the alloy ring and rim, so the bolts only clamped the 2 together, not located itself as well.

We then looked at the Robby Gordon wheels, when we fitted quality bolts, and they have not given any trouble at all on afew vehicles, all of which are heavy touring orientated vehicles running big tyres.

But they were out of production for a while.....

[brooksy]

pm sent bud,

i'll get the alloy rings soon, but they were outta my reach when i ordered the rims, if you want alloy rings also have a look at HD trail ready rims, very nice and cost comparative.

i'll make it to C44F one day to get you to weave some magic for me!!

Sam

Got it mate, thanks for info & sent PM back.
Drop in anytime for work or just to have a beer.




brooksy

[NQCalais]

My fakelocks finally arrived this week - only 4 months late. They weren't quite what I expected, but I certainly like the look. Don't look too closely though.....

[SIM79]

They have a alloy beadlock coming soon in 16x8 finally someone has made a 16 inch alloy beadlock and 17x8 also.

http://www.alliedwheels.com.au/" onclick="window.open(this.href);return false;

[def90]

if they are hex/allan screw type bolts i'd hate to try and undo them with some hard rock rash