Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

control arm and shaft :(

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

control arm and shaft :(

Post by Daisy »

Prolbems with the GQ.

Last year, upgraded to 3 inch springs and so called shocks (found out that i only had 2 inch outward travel)

Fitted sub fuel tank in. No probs

Decided to go bigger. a hd 4 inch kit found its way into my garage
Decided to prop up the GQ as far as i could with my trolley jack until the springs fell out.. apparently they didnt.. they stil were firm, the control arm was resting on my fuel tank :bad-words:

So.. fuel tank has to go.. upon lookin at fuel tank setup.. i saw the shaft was resting against the laddder bar :bad-words:

So..... the fuel tanks going to find its way out of the GQ into the FS section soon. And does anyone have any idea on what to do with the shaft?

I have included a few pics for what everyone can suggest / drum up ideas on what i can do.

Right now im thinking ill get someone to cut it out and relocate it closer to the transmission.

What ya think fellas???

TOM
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

flip the driveshaft front to rear, ie with slip spline mounted to the transfer case end as opposed to the diff, or notch the crossmember and weld in some flat plate.
Built, not bought.
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

Tom, I'm chasing a LR tank. Wot r the details?
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

5upaMav wrote:Tom, I'm chasing a LR tank. Wot r the details?


You have a PM
Top
sg
Posts: 3
Joined: Wed Dec 10, 2003 11:45 am
Location: Wollongong

Post by sg »

Tom,

It would have been nice it you had of told me this when you sold it to me.
I will have to get it modified.
Anyone have any ideas on the best way to do this?
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Flip the tailshaft and get the tank knotched by a tank builder. We do this every week. :D
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

sg wrote:Tom,

It would have been nice it you had of told me this when you sold it to me.
I will have to get it modified.
Anyone have any ideas on the best way to do this?


PM'd u.

TOM
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests