Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

VS 5L into 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Wed Jun 25, 2008 7:25 pm
Location: The Oaks

VS 5L into 80 series

Post by big white fridge »

I'm putting a VS 5L into a 1990 80 series and when bolting the power steering box on it has hit the power steering pump. Has anyone else encounted this problem if so what was there solution. Thanks.
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Make a bracket that relocates the pump higher.
Wtb, 105 series rear tyre carrier, alloys and tyres.
Top
Posts: 34
Joined: Wed Jun 25, 2008 7:25 pm
Location: The Oaks

Post by big white fridge »

That's the only solution i could think of also. Thanks for that.
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

doing the same conversion myself, and you will have to make new brackets to get it to fit properly.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

Give Ben at HiTech a call, he did it to his chopped 80...
Lovin the FZJ105-T, bling by Ryano
Top
Posts: 71
Joined: Sat May 24, 2008 1:14 pm
Location: geelong, vic

Post by hurricane »

i had to make a new braket to fit the pump higher when puttinng a 5ltr in my 60 series also.
84 FJ60, SOA , 35's, 5ltr V8, Straight Gas. 80's coils in the making.
Top
Posts: 34
Joined: Wed Jun 25, 2008 7:25 pm
Location: The Oaks

Post by big white fridge »

Thanks for that guy's, I had another look at it and I can mount the pump on the same bracket a bit higher enough to miss the box. All i have to do is weld a tab on to the origanal bracket to give the pump more support and it should be ok.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 59 guests