Something really weird happened last night to my wipers... they stopped going to the bottom of the windscreen during their cycle... now theyre stopping about 50mm short of the bottom.
If i get out of the car and push on them they go past the bottom point too.
Are my wiper motors shagged or is there something im missing?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sierra Windscreen Wipers
Sierra Windscreen Wipers
The worst thing about censorship is ███████.
Ah-hah - good point!
I just tested them when i went to lunch - on a slightly dry window they bounce along the windscreen and stop in the wrong spot - but using the window washer which has soap in it the glide nicely and stop correctly.
Must be slipping with the extra resistance!
Thanks =P
I just tested them when i went to lunch - on a slightly dry window they bounce along the windscreen and stop in the wrong spot - but using the window washer which has soap in it the glide nicely and stop correctly.
Must be slipping with the extra resistance!
Thanks =P
The worst thing about censorship is ███████.
hrm, well more rain while i was driving home and theyre doing it no matter how wet the window... i've removed the plastic cover at the pivot end and under that is a 10mm nut, which i assumed if i undid i could take the wiper off an reposition it - however thats not the case!! Taking the nut off does nothing at all! The arm is just stuck there.
I can though, by hand, push the wiper down to where its supposed to be and a touch further, as well as by hand lift the wiper up about 1/4 of the way up the windscreen before the motor stops me moving it. To me this says the motor is stuffed right? having that much play in it.
Taking out the whole dash to fit a new motor is going to SUCK!!!! If thats the case - is there an easy option here to get to the motor?
I can though, by hand, push the wiper down to where its supposed to be and a touch further, as well as by hand lift the wiper up about 1/4 of the way up the windscreen before the motor stops me moving it. To me this says the motor is stuffed right? having that much play in it.
Taking out the whole dash to fit a new motor is going to SUCK!!!! If thats the case - is there an easy option here to get to the motor?
The worst thing about censorship is ███████.
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay
im gueessing your zook is a hard top. if it were a soft top you could simply fold down the windscreen.
It is unlikely to be the wiper motor that is the problem. more likely that is the plastic bushes in the wiper arm linkages.
If you happen to find a place that sells just the plastic bushes let me know. I have only been able to buy the whole linkage set, and at $50 I waited until I found a good second hand set.
It is unlikely to be the wiper motor that is the problem. more likely that is the plastic bushes in the wiper arm linkages.
If you happen to find a place that sells just the plastic bushes let me know. I have only been able to buy the whole linkage set, and at $50 I waited until I found a good second hand set.
You want linkages?? could have asked or try the wanted section.mrw82 wrote:im gueessing your zook is a hard top. if it were a soft top you could simply fold down the windscreen.
It is unlikely to be the wiper motor that is the problem. more likely that is the plastic bushes in the wiper arm linkages.
If you happen to find a place that sells just the plastic bushes let me know. I have only been able to buy the whole linkage set, and at $50 I waited until I found a good second hand set.
By the way, ring your brother if you get your hand off it that is.
;)
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay
Who is online
Users browsing this forum: No registered users and 2 guests