Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU short side cv

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 80
Joined: Sun Jul 01, 2007 7:51 pm
Location: maroochydore

GU short side cv

Post by J.Dixon80 »

wats a good price for a 2nd hand cv? and wats a estimated time in pulling the old one out and gettin the new one in?

cheers
02 GU 4.2 intercooled Turby dies ute, 5" efs, 35"Km2's, Xgt's, bit of barwork
Top
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

just ring the wreckers and compare prices for a second hand one or try steve at driveline services @geebung they sell new NTN cv's
If you have a bit of mechanical knowledge less than 1 hour per side not rushing it, guys who compete do it in about 10-15min on average.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Top
Posts: 80
Joined: Sun Jul 01, 2007 7:51 pm
Location: maroochydore

Post by J.Dixon80 »

oh yeah cheers , 15 mins is pretty insane! done a 80 before with a mate, is there much difference between the 2?
02 GU 4.2 intercooled Turby dies ute, 5" efs, 35"Km2's, Xgt's, bit of barwork
Top
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

If you have done a toyota you can do a nissan, just as easy just remember the wheel bearings on a nissan need to be a bit tighter than toyotas.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Top
Posts: 82
Joined: Mon Nov 05, 2007 3:20 pm
Location: Geebung QLD

Post by Unidriveshafts »

As Mick said, with a bit of mechanical know how it should only take you about an hour from start to finish. We do new NTN CV & Axles for $270 + GST or just the joint alone is $160+ GST. Try Festa at All 4x4 parts-5426 8365 for a price on a 2nd handy. Cheers Steve.
UNIVERSAL DRIVESHAFT SERVICES -Tailshaft Repairs, Custom Mod's, Balancing, NTN CV's & Axles (07) 3265 3397
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests