Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cross Country ultimate intercooler kit for td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 27
Joined: Sat Jul 04, 2009 11:18 am
Location: tweedheads

Cross Country ultimate intercooler kit for td42

Post by tommy182 »

hey i was wondering if anyone has had any experience with these befour ?? they look pretty smick but at $1700 wondering if its the best way to go upgrading from the stock intercooler ?? not realy interested in runnin a front mount..
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: [b]cross country ultimate intercooler kit for td42 [/b]

Post by bogged »

you could import a frozen boost water to air for under a grand.
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Post by Auto-Craft »

water to air, the size it would need to be to outperform a good air to air wouldnt fit under the bonnet......

We have done afew cc4x4 cruiser 1hdt units, and the product seems to be ok.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

Auto-Craft wrote:water to air, the size it would need to be to outperform a good air to air wouldnt fit under the bonnet......

We have done afew cc4x4 cruiser 1hdt units, and the product seems to be ok.
??? But a water to air is smaller than air to air for the same cooling capacity. (excluding radiator pumps etc that are remote located)
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

We have done with a great result on a Gu 4.2 fact i/c. It had a wide scoop rather than two. I was pretty impressed with the results. The owner also likes it.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

We have used the product and found it to be very good, we had made a couple of similar custom ones before this was available.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 15
Joined: Tue Dec 01, 2009 7:05 am
Location: sunny coast

cross country intercooler

Post by GU BOOST »

im running a frozen boost set up [ W/A ] i was runing air to air since going W/A my EGT s have droped better fuel econ and running around 22psi with a big pump aswell. It had 238 hp@ wheels with the air to air. Haven t dynoed it with the water to air. Lovin it
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Post by Auto-Craft »

How many "good car at what ever the cost" manufacturers use water to air ?

How many UAE aftermarket tuning houses use water to air for high ambient temps ? [where cost isnt the main consideration]

The true test, intake temp measurements pre and post for each set up [and not just for a 3 up power run on the rollers either]
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

Auto-Craft wrote:How many "good car at what ever the cost" manufacturers use water to air ?

How many UAE aftermarket tuning houses use water to air for high ambient temps ? [where cost isnt the main consideration]

The true test, intake temp measurements pre and post for each set up [and not just for a 3 up power run on the rollers either]
TRD Hi LUX
Audi
Cadillac

Just to name a few of the top of my head.
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Posts: 175
Joined: Tue Feb 23, 2010 4:49 pm
Location: Dyno

Post by UGOTNUFN »

Ive got an Ultimate GU intercooler on my 05 GUIV,awsome bit of kit coupled with a D22 Navara scoop. 80 degree temp drop acroos the cooler at 19PSi on the dyno with bonnet closed and fan on.

HAving said that just fitted a 4 core laminova with huge heat exchanger in the rear of the comp truck ,charge air in at 30PSi 180 C, temp out 48 C, ambient air temp 23C.

Measured pressure drop and boost curve before and after intercooler,very very minimal difference.
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

g

Post by Clanky »

Water or air.
Both have advantages and disadvantages.
Looking beyond cost, the design criteria would tend to be swayed by other factors such as space limitations, weight, airflow etc and this would dictate what you use
Comp spec stuff may not be the best on a tourer and vice versa
Best to look at your application, decide on what coolers fit that criteria before handing over coins.
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Auto-Craft wrote:How many "good car at what ever the cost" manufacturers use water to air ?
Bugatti Veyron, nuff said.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

UGOTNUFN wrote:
Having said that just fitted a 4 core laminova with huge heat exchanger in the rear of the comp truck ,charge air in at 30PSI 180 C, temp out 48 C, ambient air temp 23C.

Measured pressure drop and boost curve before and after intercooler,very very minimal difference.
All that cooling in this little box of tricks :D

Image
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Posts: 150
Joined: Sun Jan 20, 2008 9:06 pm
Location: swan valley

Post by uzdnabuzd »

I have had air to air, a Frozen boost w/a and now a laminova.

I would pick the laminova out of all, however if i did not have the cash i would go a cross country top mount air to air. Have seen a few and was very impressed.

If you want to haze the (35") tyres with the locker on in 3rd gear on the bitumen i would go the following.....

Laminova intercooler with a big heat exchanger
United Fuel Injection pump (they are awesome)
and United Fuel Injections hybrid turbo......

You will obviously have to do other mods to the motor, but this would be a good start as you could run all this with less fuel and boost.

The reason i have mentioned this, is that you will always end up wanting more power, so do it once so you got the option ;)
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

I have the Cross Country intercooler for the 3.0 Di. Quality work using PWR cores. The quality of the 4.2L version should be the same. Highly recommended.
GU Patrol with go better bits added
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

awill4x4 wrote:
Auto-Craft wrote:How many "good car at what ever the cost" manufacturers use water to air ?
Bugatti Veyron, nuff said.
Ease of mounting perhaps played a part in the decision making process of this rear engined vehicle??

The most critical part of any intercooler whether it be air or water is surface area. Unfortunatly most off the shelf water to air coolers are lacking in this most crucial aspect. This is where the Laminova has the advantage of being quite compact whilst having large surface areas compared the typical barrel water coolers. No matter how fancy the design at the end of the day heat is transfered through contact, more contact with a cool surface, more cooling.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

PGS 4WD wrote:
awill4x4 wrote:
Auto-Craft wrote:How many "good car at what ever the cost" manufacturers use water to air ?
Bugatti Veyron, nuff said.
Ease of mounting perhaps played a part in the decision making process of this rear engined vehicle??

The most critical part of any intercooler whether it be air or water is surface area. Unfortunatly most off the shelf water to air coolers are lacking in this most crucial aspect. This is where the Laminova has the advantage of being quite compact whilst having large surface areas compared the typical barrel water coolers. No matter how fancy the design at the end of the day heat is transfered through contact, more contact with a cool surface, more cooling.

Joel
Well said.
Plus the water to air still have to have the water cooled by air eventually, so size and placement of this needs to be considered as well.
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests