Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hot compressor switch?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Hot compressor switch?

Post by Squik »

Had to drive long distance last night, and whilst flicking high beam on and off... my hand was near my compressor switch (ARB kit).

Noticed it was pretty damn warm. It's been in over a year... is this normal? :?
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Hot compressor switch?

Post by bogged »

Does it have a light in it? that could be causing the warmth.
if your unsure, take it and get it checked... Fried squik wouldnt be as nice as the sushi version.
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Are you running the switch to a relay that powers the compressor or just power to switch to comp?
Power to switch to comp would explain the heat..... Imminent failure.
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Post by Squik »

Bogged... yeah it lights up when the headlights are on or compressor is on... Want33s... runs via a relay.

Installed it myself following the instructions to the letter, only thing I didn't do was hook up lockers. Worth placing another fuse directly on the wire to the plug as a precaution?
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

meh!
mine does the same. i blame it on the light?
just drive that thing.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

DIRTY ROCK STAR wrote:meh!
mine does the same. i blame it on the light?
just drive that thing.
its the globe
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

i think theres a LED version out there of same switch that is heaps better for heat.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Post by Squik »

Cool... thanks guys. I will spend some time going back over the wiring loom and if I can't find anything I will go back to the switch light.

I may be selling the Jimny soon, want to make sure everything is kosher before I do.
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 212
Joined: Tue Jan 19, 2010 10:35 pm
Location: Brisbane

Post by TroopiePete »

Easily sorted - turn the lights off - if it's still hot after a while you may have a problem, part of the reason I love LED lights so much!

Mind you I have a couple of 10Watt LED modules and they get very hot if no heart sink is stuck to the back of the module, thinking of buying a 100Watt version except the voltage it needs is quite high!
Peter - VK4FSD
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

The ARB switches (carling switches) do get very hot - I'm sure if it were a problem the globe would have been changed some time ago.
Tetanus rolling on 37's
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

want33s wrote:Are you running the switch to a relay that powers the compressor or just power to switch to comp?
Power to switch to comp would explain the heat..... Imminent failure.
Not if he/she is just driving and therefore the compressor is not running. My light does heat up a good bit too but has never caused an issue and there is no burning markings on the switch anywhere so obviously it can handle the heat it is generating.
Post Reply

Who is online

Users browsing this forum: No registered users and 128 guests