HI i hav a NJ auto 3000
In 2h no problems
in 4h 4L i have a noise from the front axle or CV's
Driving straight and turning right under power a loud clicking noise but if i turn left just a little the nose goes away
Any help to point me in the right direction would be great.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
CV's ???
Moderator: -Scott-
Sounds a lot like a CV joint is damaged. There are four. Have a look for a split CV boot (check all four). A split boot will give you a pretty good idea which joint is poked.
Inner joint is rebuildable, outer joint supposedly isn't. I hear you can buy whole driveaxles built up ready to install for an acceptable price.
Inner joint is rebuildable, outer joint supposedly isn't. I hear you can buy whole driveaxles built up ready to install for an acceptable price.
94 NJ SWB, 3.5 V6, Auto, susp+body lift, 33x12.6 Maxxis Bighorns, AISIN hubs, ARB bar + tigerz11 2-speed winch, sliders, ARB and factory lockers.
Who is online
Users browsing this forum: No registered users and 0 guests