So, I want to wire up a reverse spotlight on the back of my car, going to mount it to my roof cage so i can use it when reversing in the scrub at night and setting up camp..
What is the best way? I figure I want it setup so its on a 3 way switch... on so it can be used without the car running, on when the reverse lights come on and off so nothing works and its just a dead light, figured that would be the most legal way of doing it... but i'am looking on tips on how to do it properly and what I will need to do it all
Appreciate any help
Tim
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear reverse light
Moderator: -Scott-
Rear reverse light
The photographer formerly known as Digital Still Photos...
now active as Capture the Dog Photography 📸
now active as Capture the Dog Photography 📸
I dont think you're allowed to have a rear-ward facing light that can be switched from the dash. Best having a switch at the back of the cab that operates the relay, as well as connected to the reverse switch in parallel.
I have two small spotties hooked up to my reverse switch, then a little 24V fluoro in the cab that can be turned on separately.
I have two small spotties hooked up to my reverse switch, then a little 24V fluoro in the cab that can be turned on separately.
Who is online
Users browsing this forum: No registered users and 14 guests