Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hey guys wondering if i have missed sumthin. and if anyone could point me in the right direction.
fuel gauge in my troll was working. done a cab swap from 89 gq wagon to 98 gq ute. i realise there is diffent plugs between years but most of the wire colores were the same. got everythin working ecept the damn fuel gauge.
same rule applies same colour wires goin them correctly but still get nothin
any one help. i can giv more info if there is any :|
89 4.2tdt pootrol,w-a,3inch spring,bar-reparing,83%ers,4.6, arb front & noslip rear, 35's
tree mended guards
If you have or can get a hold of a multimeter, test both ends of the wire for continuity. Failing that, try running a jump wire direct from the pick up to the instrument cluster. Then you can rule things out back from there.
Hope that can help.
Don't take life too seriously...it isn't permanent.
