Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

whats the difference 3 bolt and 4 bolt power steering box

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 6
Joined: Mon Feb 22, 2010 6:21 pm
Location: wantirna

whats the difference 3 bolt and 4 bolt power steering box

Post by meeran »

hi just wondering witch is better between ht e3 bolt and the 4 bolt steering boxes
Top
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

Apparently the four bolt boxes are stronger. If there is anything else I don't know.

Cheers
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Top
Posts: 51
Joined: Fri Nov 14, 2008 2:20 pm
Location: Newborough

Post by team_little_legs »

the three bolt is slower steering too right ?

cause i was going to put a 93 disco one in a 74 rangie and i got told it would be faster in the steering.
Top
Posts: 5
Joined: Sat Jan 28, 2006 5:18 pm

steering box

Post by RR308 »

The differance is one bolt on the top plate lol
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

The main difference is the 3 bolts use bronze bush's where as the 4 bolts use bearings .
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 41
Joined: Thu Oct 12, 2006 9:30 pm
Location: Perth Hills

Post by Merv »

Are they interchangable? Can you fit a four bolt box to a RRC with a 3 bolt box?
82 Rangie with lots of bits for comps
98 GU patrol with lots of bits for touring
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Merv wrote:Are they interchangable? Can you fit a four bolt box to a RRC with a 3 bolt box?
You can but then you need the whole schebang, hose fittings are different so you need the matching ps hoses and possibly the matching pitman arm as well.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Loanrangie wrote:
Merv wrote:Are they interchangable? Can you fit a four bolt box to a RRC with a 3 bolt box?
You can but then you need the whole schebang, hose fittings are different so you need the matching ps hoses and possibly the matching pitman arm as well.
Im pretty sure you only need an Oring addapter for the early lines to fit the 4 bolt box.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 33 guests