Im looking at building a rear bar and swing away wheel carier. I am going to use a 40mm trailer stub axle and wheel bearings for the piviot joint, What im wanting to know is those that have made the rear bars what slize steel sleve did you use to machine in the wheel bearings and where did you get it from?
Any photos or links to a build up would be a great help as i searched and had no luck finding any (i suck at the search function).
Mark.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Swing away rear wheel cariers.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Swing away rear wheel cariers.
Its not cool, unless it's got boost :)
Links in this thread could prove helpful:
http://www.outerlimits4x4.com/ftopic206 ... light=stub
The one i used was a nice interference fit inside 150x50x3mm RHS - made things very easy
http://www.outerlimits4x4.com/ftopic206 ... light=stub
The one i used was a nice interference fit inside 150x50x3mm RHS - made things very easy
Tetanus rolling on 37's
Who is online
Users browsing this forum: No registered users and 0 guests