Owner of 97 TJ.
While removing front and rear drive shafts for balancing and replacment of Uni's I noticed significant slack in the front Diff - ie when I could rotate the front shaft approc 1/4 turn.
Any advice / suggestions on what is causing this and if it is something to be concerned about would be welcome.
Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
97 TJ - DIFF SLACK
Moderator: GUtripper
hey mate im having front diff noise problems at the moment and checked my front shaft for slack and moved roughly the same as yours, also checked a mates hilux and it was the same.
so im guessin fairly normal?
so im guessin fairly normal?
OIIIO --- JEEP --- Buy it, wheel it, break it, ebay it, fix it, wheel it --- Its a Jeep thing , You'll understand.
Thanks I appreciate the replies - does it make any difference that an ARB locker is fitted.
As an aside I would like to compliment Wooders on 1. the service and support they offer through their business, I recently sent some pics through and asked them to identify a transmission component the response was same day and helpful - no charge as well!
2. the commitment to supporting forums like this.
well done.
As an aside I would like to compliment Wooders on 1. the service and support they offer through their business, I recently sent some pics through and asked them to identify a transmission component the response was same day and helpful - no charge as well!
2. the commitment to supporting forums like this.
well done.
Re: 97 TJ - DIFF SLACK
BHILL wrote:Owner of 97 TJ.
While removing front and rear drive shafts for balancing and replacment of Uni's I noticed significant slack in the front Diff - ie when I could rotate the front shaft approc 1/4 turn.
Any advice / suggestions on what is causing this and if it is something to be concerned about would be welcome.
Thanks.
that is one of the worst ways to determine 'play' in any diff.
sounds normal though.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Re: 97 TJ - DIFF SLACK
i dont think he was using this method as a rock solid way to determine any sort of play, obviously if anyone was super concerned they would do more then rotate the driveshaft. I was a little confused when my front shaft moved and the back one hardly notes at alljoeblow wrote:BHILL wrote:Owner of 97 TJ.
While removing front and rear drive shafts for balancing and replacment of Uni's I noticed significant slack in the front Diff - ie when I could rotate the front shaft approc 1/4 turn.
Any advice / suggestions on what is causing this and if it is something to be concerned about would be welcome.
Thanks.
that is one of the worst ways to determine 'play' in any diff.
sounds normal though.
OIIIO --- JEEP --- Buy it, wheel it, break it, ebay it, fix it, wheel it --- Its a Jeep thing , You'll understand.
Who is online
Users browsing this forum: Bing [Bot] and 0 guests