Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Patrol rims on Hilux?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Patrol rims on Hilux?

Post by SASS »

Just a quick question!
Will Nissan Patrol TE alloy tri-spoke mags fit an 1990 dual cab Hilux or are the offsets all wrong?

CHEERS

SASS :onfire: :onfire: :onfire:
Stick it in low and NAIL IT !!!!!!!!!!
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Will fit. Tyre "May" rub on steering arm on full lock.
Better on the IFS model.

Bazzle
Top
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Post by SASS »

Same Bolt Patten ?????
Stick it in low and NAIL IT !!!!!!!!!!
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

i think nissan wheels sat closer in with the offset but will fit
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Post by SASS »

Anyone know the offset difference?
Dont want to lose too much Track!!!
Stick it in low and NAIL IT !!!!!!!!!!
Top
Posts: 71
Joined: Tue Mar 09, 2004 7:38 pm
Location: COFFS HARBOUR

Contact:
Contact DAAS KAPITAL

Post by DAAS KAPITAL »

Sass,

I`ve had trouble before (mine is an 85 4-runner) with 16x8inch alloys which were for a nissan or landcruiser they were offset in too far and rubbed my disc calipers, steering pitman arm and probably my chassis on articulation etc.

I`m currently running 15x10inch USA steel wheels to suit nissan/lux/cruiser but my truck has VENTED disc calipers fittted & these rims also rubbed on the calipers which i had to grind off approx 4mm of the edge of the calipers to fit.

I`d try before you buy if possible.
better than a bought one.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests