Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cooling Fan Repair
Moderator: Tiny
Cooling Fan Repair
For about a week my air fan was very loose so it wasn't running at the right speeds when the engine need it. So i had some overheat when the engine was running.
Here is how an opened coupling fan looks
Here is the part that looks towards the radiator. Here you can see two teeths that locks on the crown gear you will see next.
Next its the part that bolts on the water-pump. When the heat is rising up then also the crown gear its going towards the two red teeths that you saw before.
Then when the heat is lower the spiral will push down the crown gear from the two red teeths so the AIR FAN will not affect the engine power and reduce the noise. Now i have a question is it normal the grease-oil to be black and inside also i have found water. Tomorrow i will go to a oil shop to ask if they have any kind of grease-oil for a coupling.
Here is how an opened coupling fan looks
Here is the part that looks towards the radiator. Here you can see two teeths that locks on the crown gear you will see next.
Next its the part that bolts on the water-pump. When the heat is rising up then also the crown gear its going towards the two red teeths that you saw before.
Then when the heat is lower the spiral will push down the crown gear from the two red teeths so the AIR FAN will not affect the engine power and reduce the noise. Now i have a question is it normal the grease-oil to be black and inside also i have found water. Tomorrow i will go to a oil shop to ask if they have any kind of grease-oil for a coupling.
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
The fluid inside is a silicone based material. Its available from Toyota as a spare part and many people have sucessfully refilled theirs.
the other option is to "lock it up" mechanically - noisier than stock but at least there's airflow.
the other option is to "lock it up" mechanically - noisier than stock but at least there's airflow.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
OK next to my house i have a Toyota shop
The person from Italy has used about 30 ml and also another friend had done that and it works but i have to give it a try until i get the right amount.
The person from Italy has used about 30 ml and also another friend had done that and it works but i have to give it a try until i get the right amount.
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
I have used about 20-25 ml of silicon oil
the code number of the TOYOTA shop its 08816-03001 now the air fan works a little bit noise but the gauge-temperature hasnt changed at all but it stills works fine.
the code number of the TOYOTA shop its 08816-03001 now the air fan works a little bit noise but the gauge-temperature hasnt changed at all but it stills works fine.
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
Re: Cooling Fan Repair
My viscous Hub had completely locked up which was great in Summer!
But not so good in Winter as in those 0 and -3 mornings the motor never gets even warm. Is this repairable?
Ive been quoted 2nd hand hub is around $120 and new $600.
But not so good in Winter as in those 0 and -3 mornings the motor never gets even warm. Is this repairable?
Ive been quoted 2nd hand hub is around $120 and new $600.
Re: Cooling Fan Repair
found this on e-bay,
http://cgi.ebay.com.au/Daihatsu-Delta-R ... 5889cb7418" onclick="window.open(this.href);return false;
other wise buy a thermo fan.
http://cgi.ebay.com.au/Daihatsu-Delta-R ... 5889cb7418" onclick="window.open(this.href);return false;
other wise buy a thermo fan.
Who is online
Users browsing this forum: No registered users and 34 guests