Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series wont engage into 4wd

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

100 series wont engage into 4wd

Post by gutlux44 »

hi all, i have a 98 model 4.2 diesel 100 series with a part time 4wd kit fitted. Problem is it wont engage into 4wd. hubs are locking correctly but when i push the diff lock button in the dash it wont engage and the 4x4 light does not come on in the dash either. I can hear it trying to lock in when i push the button but no go. it worked fine last time i used it. Any help would be great. cheers Brad
Top
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

Post by gutlux44 »

anyone????
Top
Posts: 110
Joined: Tue May 17, 2005 9:23 pm
Location: ___

Post by stumpyGU »

leaky vacuum hose somewhere?
PM ME FOR CHEAP LASER CUTTING. AUS WIDE DELIVERY
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Check ya electrics. There are plugs that sit above ya transfer that might have come lose. There is a plug there I have disconnected so I can put in Low 2wd. Helps when reversing the trailer.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

Post by gutlux44 »

i can hear the electric motor turning when i push the button, but it wont lock in. i know the plug your talking about, Ive had trouble with it before. Do they use vacuum to engage 4x4???
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

Is the motor turning continuously when you press the button, or just momentarily like it normally does?

From what you say it sounds like a linkage problem between the motor and the shift fork.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Top
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

Post by gutlux44 »

It goes for about 3 seconds then cuts out. It normally makes a "clunk" when it locks in, but its not doing that. I guess i will have to take the transfer case out and have a look.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 80 guests