Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lightforce 240 Blitz Lights mounting????

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 20
Joined: Sat Apr 04, 2009 10:16 pm
Location: Stinky bog hole, Vic

Lightforce 240 Blitz Lights mounting????

Post by Blinky900 »

Hi all, I run a GU ute 42TD Manual with an ARB front bar, lowmount winch with the control box sitting in cutout just below grill the question is can i run 3 Lightforce 240 blitz in the centre section of the bar i'm aware that i would have too drill new holes and the lights will stick out past the front of the bar as i measure they should fit but i'm not 100% has anyone done this or know of it to be done? Do they fit? i'm also concerned with restricted air flow will it affected engine temps or cause overheating problems.


If anyone has any pic's of what this looks like i would love too see.

Thanks Blinky
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

my arb bar and lightforces dont know if they are hte model you mean but might help.

Image

side on

Image

mine have about 1cm of packing under them so they dont have to sit too far forward.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Re: Lightforce 240 Blitz Lights mounting????

Post by weeman »

Blinky900 wrote:Hi all, I run a GU ute 42TD Manual with an ARB front bar, lowmount winch with the control box sitting in cutout just below grill the question is can i run 3 Lightforce 240 blitz in the centre section of the bar i'm aware that i would have too drill new holes and the lights will stick out past the front of the bar as i measure they should fit but i'm not 100% has anyone done this or know of it to be done? Do they fit? i'm also concerned with restricted air flow will it affected engine temps or cause overheating problems.


If anyone has any pic's of what this looks like i would love too see.

Thanks Blinky
All im commenting on is yes it will affect he air flow, no need to fit 3 lights.

Just get the pair and fit a hid kit if you want brighter lights...

plus in my opinion 3 lights across the bar looks like shit and more shit to steal and break at the same time...
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

spend $225 to get the HID retro fit kit and you definitely won't need a third light. It'll work out cheaper and better.
Beaut Utes and 4x4's - Driving your dollar further off road

Call Matt - 0411 563 300

[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Top
Posts: 2
Joined: Fri May 21, 2010 10:44 pm
Location: sa

Post by TJPATROL »

i have 3 lightforce 240xgt in the front off my gu patrol its an arb bullbar
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 70 guests