Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flairs / brush bars

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 160
Joined: Sun Oct 26, 2008 11:40 am
Location: beenleigh

Flairs / brush bars

Post by zookster666 »

I have been playing with some ideas for flairs I knocked this up tonight tell me what you think
they will be mounted to sliders aswell
Image
Image
Image
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

looks pretty cool and like they will work well.Are they gonna be removable in anyway seperately to sliders or bullbar??

Maybe a flange as such up near the bullbar or a piece of plate on the bullbar ends tapped just so you could remove them if any of it had to come off foe some reason.Just a thought but top job man ;)
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 160
Joined: Sun Oct 26, 2008 11:40 am
Location: beenleigh

Post by zookster666 »

Cheers mate the sills will be cut out and have rhs welded In as you said the bull bar and sill will have tapped plated welded on so they can be removed if they get damaged etc

I'm also thinking about building a removable Exo cage which will brace them even more. I'm also not sure about whether I should use alloy or rubber to cover the tyres

has anyone welded rhs into the sills before? Is it very hard?
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

would have looked nicer if you retained the shape of the wheel arch IMO..
The worst thing about censorship is ███████.
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

alien wrote:would have looked nicer if you retained the shape of the wheel arch IMO..
Agreed... :?
Grow some balls.

That is all.
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

good luck getting it right with just a cheaper bender and not a roller??
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 160
Joined: Sun Oct 26, 2008 11:40 am
Location: beenleigh

Post by zookster666 »

The guards will be cut out to make room for the tyres as I refuse to run a body lift
and like turbo Tonka said it would be extremely hard to get a roll bend
with a normal bender
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 0 guests