Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

PTO drive unit

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 30
Joined: Sat Mar 12, 2005 4:50 pm

PTO drive unit

Post by Pony »

Evening all;
Does anyone know where I can source a 10 bolt PTO drive to suit the H151F gearbox, which went with the 1HD-FTE Cruiser motor?
I have tried Advanced Trailer Spares in Brisbane, who used make these winches, however since the new V8's came out with no facility for a PTO drive they have stopped making them.
I also believe that the TD 80 series may have also had the 10 bolt drive. So if anyone has a drive laying around or know where I can purchase one from I would be grateful.
Thanks
Brett
Last edited by Pony on Fri May 21, 2010 9:14 pm, edited 1 time in total.
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Try some of the Japanese grey import dealers. They usually have vehicles with them as standard in their import list and may be able to source a PTO ex Japan as "spare parts".

Grey import wrecker may help too.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 220
Joined: Wed Jul 15, 2009 3:15 pm
Location: Australia

mmm

Post by SteelArt »

Did you try APE ?

http://www.winch.com.au/winch/home/home.html
Top
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

Post by rowenb »

What brand, price and where do you get a pto for an 80 series? Haven't seen many done with these so are they worth it?
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

My understanding was only the part time 4wd standard wagon (barn door) version of the 80 series had facilities for a PTO drive on the transfer case?
Tetanus rolling on 37's
Top
Posts: 30
Joined: Sat Mar 12, 2005 4:50 pm

Post by Pony »

Thanks guys, some good suggestions there to follow up.
It isn't for an 80 series, it is for a 79 series ute, I have the winch and drive shafts, just need the PTO drive.
Thanks
Brett
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

My mistake, i didn't read the details properly in your first post - the std 80 ran the h150f? i think...

not that any of this is particularly helpful unless you're sourcing one through wrecker.

...i'll go to bed now :oops:
Tetanus rolling on 37's
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

These guys make PTO's for the cruisers in 2 versions.

http://www.outerlimits4x4.com/ftopic201 ... =hydrapneu


_
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

powauto
www.powauto.com.au
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest