Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bead condition on tire

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 118
Joined: Sun May 18, 2008 6:51 pm
Location: newcastle,nsw

bead condition on tire

Post by barnsy »

soo ive bought a set of second hand mtr's and it looks like the bead has been damaged when they have been removed from the old rims. its only on one spot on each tyre which makes me think thats how it has been damaged.
my question is will this damage affect the seating of the tire on the rim causeing it to leak??
it is only damaged on the base of the bead and not on the side of the bead..
the photos arnt very good quality but i hope it gives someone an idea of what i mean.
Image
Image
Posts: 119
Joined: Mon Mar 24, 2008 1:56 pm
Location: melbourne

Post by Ye Olde Rangie »

it could cause an issue but normally its ok it depends on who fits them and what rims there going on
1981 range rover- 4"coil + 2"body rollcage, disco interior and goes better than a pootrol
Posts: 118
Joined: Sun May 18, 2008 6:51 pm
Location: newcastle,nsw

Post by barnsy »

they are 37x12.5 mtr's on 15x8 rims if this helps
Posts: 118
Joined: Sun May 18, 2008 6:51 pm
Location: newcastle,nsw

Post by barnsy »

i bought them off rims and only just realised the damage.
funny you say that because i only live around the corner in mayfield
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

I dont think they should be a problem.
The 35s I bought not on rims, were worse than that when I got them. Very well used, but $150 for 4 35in BFG muds, I had them fitted professionally to 15x8 sunnys, Ive had no probs yet. Touch wood.
And if you live in Mayfield, make sure you lock your lux away at night.
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

should be fine, just get the fitters to use some bead sealer on them. I had a few like that before and never had a problem
If ignorance is bliss, then why aren't there more happy teenagers?
Banned
Posts: 82
Joined: Sun Apr 11, 2010 2:45 pm
Location: mt isa

Post by yamaha12 »

yer theyl be right the bit thats ripped off dosent really seal against the rim anyway its the bit above that
80's :)
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I'd say the bead in the top photo is a worry. There's none of the flat bead area left. It will leak or burp air readily at low pressure and you'll end up with slow bead leaks. We spent a hour on the last trip I was on unseating and cleaning the mud out of the bead of a tyre with a slow leak only to find the bead looked like this.

I'd run tubes.

I think the bottom photo is OK - there's still a fair amount of flat bead surface left.

There must be a lot of butchers out there in tyre stores. Most of the second hand swampers I've bought have really messed up beads- I mount and dismount all my own tyres and have never damaged one like that.


Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 118
Joined: Sun May 18, 2008 6:51 pm
Location: newcastle,nsw

Post by barnsy »

cheers for all the replys guys.
ill have a chat the the blokes at the tire shop and see what they recommend, either to run tubes to be safe or to just try a sealant on the bead.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests