GDay all
I have a toyota electric diff lock in the rear diff of my 40. It was working great until the other weekend when we did a particularly long river crossing, now nothing. Have checked all wiring, relays, switch and even changed out the crappy toyota plug at the diff lock with a you beaut militry rated dust and water proof plug. When my brother and i pulled the actuator unit apart found the tiniest amount of corrosion on the terminals, cleaned them up but still nothing. Does any one have information on what else to check, who to go to, etc to get it working again.
If anyone is interested some of the information on the actuator unit is as follows: -
AISIN SEIKI Co
I beleive the serial number to be: 1450600
It also says it is 24V but my BJ42 is a 12V system.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Toyota Electric Diff Lock Help
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 10 guests