Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

exhaust temp at 650 degrees on td gu ute

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 6
Joined: Fri Feb 23, 2007 10:37 pm
Location: SUNNY COAST

exhaust temp at 650 degrees on td gu ute

Post by matty »

just want some sugestions why its running so hot boost is at 8 and fuel is right down any answers is the pump need rebuilding
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

Celcius or farenheit, where is the probe situated, is the guage accurate?

How much power is it making, what engine, what mods??



andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Top
Posts: 6
Joined: Fri Feb 23, 2007 10:37 pm
Location: SUNNY COAST

Post by matty »

celcius there mods are 3 inch exchaust 33 tyres not much ekse no real engine mods i took it to a disiel mob to turn the boost up and they said the temp was sitting at 650
Top
Posts: 42
Joined: Tue Jun 09, 2009 7:47 pm
Location: brisvegas

Post by ETU47 »

brisbane dyno at woolloogabba they know there shit!!!!
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

matty wrote:celcius there mods are 3 inch exchaust 33 tyres not much ekse no real engine mods i took it to a disiel mob to turn the boost up and they said the temp was sitting at 650
Did the shop give there thought of why it is happening. Buy a piro so you know for yourself.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

My truck used to run between 620 and 650 even after all the mods. 650 was my limit for most things. :twisted:
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Post by Dominator »

I have a pyro mounted in the exhaust manifold (pre turbo) and under load, say going up a decent hill on the highway it can climb up to 650. With the sierra on the trailer behind it will get up to 700. That is with N/A pump (wound right out), 13psi and a dyno tune. AFIK 650 is fine, but i would invest in a pyro. good insurance.
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

650 is fine for a pre turbo reading a little on the warm side if it is a post turbo reading.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests