Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
My bro got his mate to change the clutch in his Hilux, and well now it won't disengage properly. It was fine b4, just slipped real bad and got to the point where it had no drive from it slipping 100%, so towed it home.
They changed the clutch over and now it keeps grinding away when he tries to put it into any gears, like it's not disengaging.
Any ideas? I know on the old Commodores when we've changed clutches that we had to adjust the clutch fork pivot ball......but not sure if the Hilux is the same.
Not sure wat model it is. But it's a 4cyl diesel 5spd. Prolly around mid to late 80's.
Thx for the replies guys! Will definitely report back with the results. My bro has it at his work in the mechanic's yard, and the mechanic lives in a small town about half hour away, so didn't wanna bother him over the weekend.
