Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

STRAIGHTEN OUT A 80.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 41
Joined: Wed Dec 10, 2008 10:03 am
Location: LANGWARRIN

STRAIGHTEN OUT A 80.

Post by MADDS1 »

Hey Guys,
I tapped a stump in my 80 and now my passenger side chassis rail is bout a inch or 2 towards the rear of the car. Anyone know anyone with a chassis rig or anyone recomended in S.E Vic???

Thanks

Alex
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Re: STRAIGHTEN OUT A 80.

Post by Simo63 »

MADDS1 wrote:Hey Guys,
I tapped a stump in my 80 and now my passenger side chassis rail is bout a inch or 2 towards the rear of the car. Anyone know anyone with a chassis rig or anyone recomended in S.E Vic???

Thanks

Alex
1 or 2 inches bent .... and only tapped the stump???

Most panel beaters have the required gear but are you comprehensively insured? If so then you need to notify your insurer first.
TD 80 Series, F&R Lockers, Winch etc
Top
Posts: 70
Joined: Wed May 20, 2009 5:47 pm
Location: WARNEET

hi there

Post by tiny80 »

just taped a stump hu you must have hit at least 50 kmh to bend it
you can do three things
insurance if you have it will writen it off most likely so take out any gear before hand as it will be theres as repair to chassie are funny

no insurance
take it to some panel beater shops in cranny somerville seaford for prices
or try bending it back your self useing bottel jacks from othere chassie rail and oxy heat can work then brace it up
or buy a new chassie rail from wreakers and change over every thing
are you sure its that bent pics would be nice
lifted and locked 80 series landcrusier
turbo 1 fzfe straight gas 35" claws and heaps more crap inside
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Put a sling on the bent front part and wrap it around the stump and drive backwards fast.
Confucious say...man who argue with idiot, worserer himself
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest