Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bent upper control arm clearence?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 45
Joined: Thu Jan 03, 2008 12:19 pm
Location: tyres

bent upper control arm clearence?

Post by ceruptmav »

hey all just wanted to know if anyone had the bent upper control arm to suit the aux fuel tank on the gq's just wanted to know if when lifted to say 4" on full flex will the arms still clear? mine hits pritty eary in the flex now with a 2" just hard to see that a small bend can create the clearence needed. cheers
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

These might help http://www.superiorengineering.com.au/p ... 15a099f8aa
Top
Posts: 45
Joined: Thu Jan 03, 2008 12:19 pm
Location: tyres

Post by ceruptmav »

aa too good thanx heaps
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

I just cut mine in half and welded in a 45* steam pipe bend. More clearance than the superiors and you can run even longer shocks.
Don't take life too seriously...it isn't permanent.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 123 guests