Guys, recently purchased a arb winch bar for my zook.
trying to fit my warn 8000 winch into it. I am missing the 4 bolts that hold the winch to the bar.
Are these 'special' bolts? as they look like they slot into the winch? does anyone have any close up pics of theirs bolted in?
Where should I go to get these bolts and I presume nuts?
Also does the fairlead bolt up through the same bolts?
Thanks
Andy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
winch bolts
winch bolts
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
Try ARB (?). The bolts should be metric (Warn winches are available with metric and inch hardware) but the nuts are square not hexagonal and the length is pretty specific.
No, the fairlead does not bolt to the same holes as the winch.
Steve.
No, the fairlead does not bolt to the same holes as the winch.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
What sort of fairlead are you using Andy? If its a hawse style it will bolt up to the bottom mount holes as I cleared the bottom of the cutout for this reason.
If its a roller failead, depending on the type, warn or aftermarket you will find that it will either have one bolt into the mounting points and then the vertical rollers bolt into the top outrigger mounts...
If its a roller failead, depending on the type, warn or aftermarket you will find that it will either have one bolt into the mounting points and then the vertical rollers bolt into the top outrigger mounts...
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
Awesome thanks weaves. Will head to the bolt shop today.
Dank - I have a roller fairlead as Im running cable, however I will eventually go to rope, therefore probs hawse style.
Can you use Hawse with cable/wire?
Dank - I have a roller fairlead as Im running cable, however I will eventually go to rope, therefore probs hawse style.
Can you use Hawse with cable/wire?
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
I dropped one of the square nuts ( and of course couldn't find it again.... ).
Ended up using plain old grade 8 hex nuts and found they were large enough not to spin in the housing.
So if all else fails then just use ggod quality standard nuts and bolts.
Ended up using plain old grade 8 hex nuts and found they were large enough not to spin in the housing.
So if all else fails then just use ggod quality standard nuts and bolts.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 17 guests