Hi all,
Recently put a bearing kit through my standard 1.3 transfer. All bearing noise has now gone and it's much nicer to drive... But I now have a clunking noise when i take my foot off the accelerator and remove load.
It also makes an interesting clunking noise as i slow down, at speed its fine but if I slow down in neutral it clunks and the speed of the clunks slow as the speed of the car does. This generally happens if slowing while downhill, I was thinking maybe the selector between 2wd and 4hi was touching slightly...
Has anyone had a similar problem/noise?
Pete
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.3L Transfer noise.
1.3L Transfer noise.
Ozkor Auto Tech - 51 Orchard Road, Brookvale
1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
, check ya diff out for backlash in the pinion, as this is a common problem.Who is online
Users browsing this forum: No registered users and 0 guests