Modded my Rangie...Now The EVOLUTION of Bob! More pics up...

[RAY185]

Aww shit, Unsubscribe is not working! I'm still replying!

(but you're damn right Nottie! )

[ISUZUROVER]

What's this?






































That's all you get, fawkers

MogSals are on their way

Surely you need a few welds to hold things together (and the lube in)???

Or are you using super glue to hold it together like the KAM glue-on locker???

And KY for lube? I am sure Grimy has a big supply...

[nottie]

Ben its what you cant see bud.

[uninformed]

Ben its what you cant see bud.

well we're not seeing a hell of alot......so these must be the SHIT!

[ISUZUROVER]

Ben its what you cant see bud.

Yes indeed - I can't see any welds!

[Micka]

Ben its what you cant see bud.

Yes indeed - I can't see any welds!

Double-sided tape

[Micka]

Ben its what you cant see bud.

well we're not seeing a hell of alot......so these must be the SHIT!

Keep your pants on, Serg

I have to get them back from quarantine after Nottie had his way with them the other day. I'll get some pics up then. Hopefully they haven't been too affected by Nottie's friction heat-treating and liquid cooling, though. They did look a little worse for wear when I had to pries him out of them.

[RAY185]

Aha! They have been internally protien welded? That's old skool cool.

I'm an old hand at this technique. Let me know if you need anymore done. As you know my usual contract has been suspended temporarily so I'm looking for some casual jobs to keep me primed for when it starts up again. Maybe we can barter my services for a set of those wicked axle stands?

[Roctoy]

Aha! They have been internally protien welded? That's old skool cool.

I'm an old hand at this technique. Let me know if you need anymore done. As you know my usual contract has been suspended temporarily so I'm looking for some casual jobs to keep me primed for when it starts up again. Maybe we can barter my services for a set of those wicked axle stands?

there is sooo much wrong with this post Ray....

i got a pretty cool pic sent to me the other day regarding this build, all i can say is WOW!

massive amounts of overkill, but way, way cool factor!

[GRIMACE]

i got a pretty cool pic sent to me the other day regarding this build, all i can say is WOW!

massive amounts of overkill, but way, way cool factor!

I dont know what photos your talking about... I got some photos too, but mine only contained some sexc mofo doin some sort of salute, was there and axle in that photo??

[RAY185]

i got a pretty cool pic sent to me the other day regarding this build, all i can say is WOW!

massive amounts of overkill, but way, way cool factor!

I dont know what photos your talking about... I got some photos too, but mine only contained some sexc mofo doin some sort of salute, was there and axle in that photo??

Did he have a peg leg and an eye patch?

[RAY185]

there is sooo much wrong with this post Ray....

Too much?

[ISUZUROVER]

I have to get them back from quarantine after Nottie had his way with them the other day. I'll get some pics up then. Hopefully they haven't been too affected by Nottie's friction heat-treating and liquid cooling, though. They did look a little worse for wear when I had to pries him out of them.

If the rumours about Nottie are true, the words "sausage" and "hallway" come to mind.

[Micka]

Soak my cork!!!



I know...I know...I'm making some axle stands for it The blocks were the closest thing available.

[Slunnie]

POS - needs a wheel alignment.




Kidding, that looks awesome! Well done with it! Whens the rear?

[uninformed]

if stock the rear sals is a low pinion would not it have to be flipped to high pinion to counter the rotation of the 2 gear portal boxes? therefore the front would be low pinion???? or did i just have a brain fuck?

[ISUZUROVER]

Great work!!!

[PacMan]

if stock the rear sals is a low pinion would not it have to be flipped to high pinion to counter the rotation of the 2 gear portal boxes? therefore the front would be low pinion???? or did i just have a brain .?

I think you can put a front diff center in the rear or opposite without changing pinion position. It just runs on the wrong side of the gears but in the same direction. That means using a low pinion as high pinion in what ever axle, makes it going reverse and that is what you need for the unimog portals.

It will run in the front on the right side of gears and in the back on the wrong side.

But maybe i am a little brain dead at the moment?!?


Thanks
Chris

[Slunnie]

Is the top diff ther rear MogSals?

Just wondering because the flanges are totally different between the two and the flange is closer to the diff than the front which also has the steering knuckles. I'm assuming its the rear, it just seems a fair bit different.

Serg I think the rear as a LP becomes also a front LP and then flipped to HP for the portals. So it should be front and rear HP with these portals

[hillbilliywheelchair]

i see you have those rear unbreakable invisible axles their

[Micka]

if stock the rear sals is a low pinion would not it have to be flipped to high pinion to counter the rotation of the 2 gear portal boxes? therefore the front would be low pinion???? or did i just have a brain .?

I think you can put a front diff center in the rear or opposite without changing pinion position. It just runs on the wrong side of the gears but in the same direction. That means using a low pinion as high pinion in what ever axle, makes it going reverse and that is what you need for the unimog portals.



Thanks
Chris

Correct.

[Micka]

Is the top diff ther rear MogSals?

Just wondering because the flanges are totally different between the two and the flange is closer to the diff than the front which also has the steering knuckles. I'm assuming its the rear, it just seems a fair bit different.

Serg I think the rear as a LP becomes also a front LP and then flipped to HP for the portals. So it should be front and rear HP with these portals

Same diff.

The top pic was taken from the pinion side of the housing (the cast ribs are visable) and the bottom pic from the diff hat side.

The rear has not been started yet. It will be a mirror image of this one so that the outputs line up with the pinions.

[Micka]

i see you have those rear unbreakable invisible axles their

That's the front diff

But you are not far off calling the axles unbreakable. Keith from RoverTracks is building me the biggest, baddest axles that he has done to date.

You won't believe the size of these things. It will be like watching black porn...except silver and shiny

[uninformed]

so you are running on the coast side of the R+P?
are these being set up with D60 or Sals internals?
give us some specs on the axles....

[Micka]

so you are running on the coast side of the R+P?
are these being set up with D60 or Sals internals?
give us some specs on the axles....

Sals. Want to keep it as Rover as possible.

And when I get the axles, you get some info.

[RUFF]

How wide is it? That pinion looks a long way inboard?

[bubs]

Looking good, only 1 hub left to spline

[nottie]

Looking good, only 1 hub left to spline

So does that mean 3 more months?

[bubs]

Looking good, only 1 hub left to spline

So does that mean 3 more months?

maybe 2

[nottie]

Im shore they will be worth it.
Do you know yet how much wider they are yet bubs over stock?