Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engineering 33" and suspension on GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

engineering 33" and suspension on GQ

Post by familybus »

ok tryed to get the dual cab engineered today and no luck all busy till next week!
what im asking is
1) ive got 33" x 15s and will need a speedo correction cert to pass them, $460 speedo correction $44 for cert for speedo correction!
2) 3" inch shocks and spring only lift with swaybars still connected and nothing else changed!

ok $660 for the chop mod to be certified or
$1,100 + $460 + $44 for wheel suspension and dual cab certified!

all or just cab chop?

ive got the 16 tooth cog on the speedo and have been told i can change that to a bigger one to correct the speedo but no one can tell me what tooth size will cure the speedo for 33"
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Posts: 26
Joined: Mon Dec 14, 2009 2:19 pm
Location: Vancouver BC

Post by Abitibi »

Have you tested your speed with 33's? When I put 33 on mine the speedo became perfect (GPS accurate)!

Just a thought...

Cheers,
David
Posts: 72
Joined: Tue Apr 21, 2009 1:27 pm
Location: Brisbane thrashing my Troll

Post by Warnie »

Mine is the same. With 33's my speedo is 1 km out at 100km/hr.

Maybe save some money and check it with your gps
LWB GQ (Sharleen) RIP
1995 GQ LWB ST (Elizabeth) + some fun stuff
Posts: 248
Joined: Fri Jan 16, 2009 12:48 pm
Location: Sth Wst QLD

Post by 300WinMag »

I think it depends on the year modle of your GQ, mine is a 1988 and I calculated that if I ran 33" tyres my speedo would run true at 100km per hour +/- 1 km per hour. I have just fitted 33" tyres and my GPS says speedo is correct now. It was out by 10km/hr with 32" tyres at 100km/hr.
26 PSI 88 SWB TD 42 W/A IC
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

If you get it engineered for 33" tires then would it be worth going the extra little bit for 35's? Then at least you have that option later on. It may be a big step up between the 2 sizes though as far as engineering goes.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 30
Joined: Thu Nov 26, 2009 8:29 pm
Location: Brisbane

Post by gumbs »

As another note on the speedo thing, if you are out you can always 'adjust' it by hand if its close. My last car (not a 4wd) was 6% out, so I took the plastic off the front of the speedo got to 100km/h (gps confirmed) and gave the needle a gentle twist so it said the correct speed. At 50km/h I was actually doing 47km/h with the difference getting less as I got towards 100km/h. No one said shit about it when I got a defect cleared.
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

Warnie wrote:Mine is the same. With 33's my speedo is 1 km out at 100km/hr.

Maybe save some money and check it with your gps
Same here for me. Going from 31" to 33" only drops the revs by about 150rpm in 5th at 100 km/h. On 31's my speedo was about 5km/h optimistic, on 33's, spot on.
Post Reply

Who is online

Users browsing this forum: No registered users and 149 guests