ok tryed to get the dual cab engineered today and no luck all busy till next week!
what im asking is
1) ive got 33" x 15s and will need a speedo correction cert to pass them, $460 speedo correction $44 for cert for speedo correction!
2) 3" inch shocks and spring only lift with swaybars still connected and nothing else changed!
ok $660 for the chop mod to be certified or
$1,100 + $460 + $44 for wheel suspension and dual cab certified!
all or just cab chop?
ive got the 16 tooth cog on the speedo and have been told i can change that to a bigger one to correct the speedo but no one can tell me what tooth size will cure the speedo for 33"
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engineering 33" and suspension on GQ
engineering 33" and suspension on GQ
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
I think it depends on the year modle of your GQ, mine is a 1988 and I calculated that if I ran 33" tyres my speedo would run true at 100km per hour +/- 1 km per hour. I have just fitted 33" tyres and my GPS says speedo is correct now. It was out by 10km/hr with 32" tyres at 100km/hr.
26 PSI 88 SWB TD 42 W/A IC
If you get it engineered for 33" tires then would it be worth going the extra little bit for 35's? Then at least you have that option later on. It may be a big step up between the 2 sizes though as far as engineering goes.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
As another note on the speedo thing, if you are out you can always 'adjust' it by hand if its close. My last car (not a 4wd) was 6% out, so I took the plastic off the front of the speedo got to 100km/h (gps confirmed) and gave the needle a gentle twist so it said the correct speed. At 50km/h I was actually doing 47km/h with the difference getting less as I got towards 100km/h. No one said shit about it when I got a defect cleared.
Who is online
Users browsing this forum: No registered users and 2 guests