G'day
Late last year I rebuilt my 1HZ and ever since then the tacho hasn't worked.
Hasn't bothered me but it's something I'd like to fix. Is there likely to be a plug somewhere I've missed? I can't seem to find what I want out of the workshop manual.
I've checked the back of the cluster as I had that out too and that appears fine.
Cheers, DAve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
75series Tacho
Moderators: toaddog, Elmo, DUDELUX
75series Tacho
Dave
If it's the same pick up as the 2H diesel (magnetic pick up on the p.side of the bell housing) it'll be the plug that is on top of the bell housing at the back of the motor. They are known to get crap in them and it may have even been disconnected when you pulled the donk out.
Don't take life too seriously...it isn't permanent.
Who is online
Users browsing this forum: No registered users and 1 guest