Found these nice looking winchs from a pommy site.
http://www.firstfour.co.uk/p0/red-hydra ... 398016.htm
Cost $2900au for the top of the range item wonder if there worth it ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Trick pommy winch
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Trick pommy winch
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
They look the goods. Nearly as fast as the tripple motor low mount of the rocky guys. That thing is seriously fast. 40klmh to winch in. 
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
It's similar in specs to a Milemarker (or OX)
---> Both have 6:1 reduction planetary gearbox's.
---> Milemarker 10500lb winch has a 17.9 cu in /rev (295cc/rev) motor
---> Milemarker test data proves 100 bar (1450psi) is required to get full line pull.
They fit 160cc/rev or 100cc/rev motors depending on model and state that 200 bar (2900psi) is required for full pull.
If you consider the 100cc/rev motor is 3 times smaller in displacement than the Milemarker you would expect theoretically for the pressure to be 3 times higher, ie 3 x 100 bar = 300 bar, (not 200 bar). I know that they use roller bearings in the RED winches to reduce friction compared to the plastic bushes in the milemarker, but the pressure still seems a bit lower than i would have assumed.
--> 200 bar seems about right for the 160cc/rev motor however.
My RUNVA has a 33:1 gearbox and 50cc/rev motor which is (33/6) 5.5 times more reduction than the milemarker but the motor is also (295/50) 5.9 times smaller so fairly similar.
Their crank drive setup looks ok.
_
---> Both have 6:1 reduction planetary gearbox's.
---> Milemarker 10500lb winch has a 17.9 cu in /rev (295cc/rev) motor
---> Milemarker test data proves 100 bar (1450psi) is required to get full line pull.
They fit 160cc/rev or 100cc/rev motors depending on model and state that 200 bar (2900psi) is required for full pull.
If you consider the 100cc/rev motor is 3 times smaller in displacement than the Milemarker you would expect theoretically for the pressure to be 3 times higher, ie 3 x 100 bar = 300 bar, (not 200 bar). I know that they use roller bearings in the RED winches to reduce friction compared to the plastic bushes in the milemarker, but the pressure still seems a bit lower than i would have assumed.
--> 200 bar seems about right for the 160cc/rev motor however.
My RUNVA has a 33:1 gearbox and 50cc/rev motor which is (33/6) 5.5 times more reduction than the milemarker but the motor is also (295/50) 5.9 times smaller so fairly similar.
Their crank drive setup looks ok.
_
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
The crank driven set up does look nice. Curious how they keep oil too the pump, can it suck it from where ever the storage tank is ? Theres a second toothed belt running to the botom of the engine wonder what thats for ?
I rang them up on friday for some more info, there winch Guru was away. will try them next week for some more info.
Got some info on the milemaker Type R winch too,
The complete Type R winch with motor is £875 excluding VAT.
The cost to ship one to you would be £167.90.
Works out to about $1800 au
The quality of the RED winch is impressive will have a cat with them and sus out the best options
I rang them up on friday for some more info, there winch Guru was away. will try them next week for some more info.
Got some info on the milemaker Type R winch too,
The complete Type R winch with motor is £875 excluding VAT.
The cost to ship one to you would be £167.90.
Works out to about $1800 au
The quality of the RED winch is impressive will have a cat with them and sus out the best options
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
does the cost of the winch include the crank driven pump and lines etc ?AFeral wrote:The crank driven set up does look nice. Curious how they keep oil too the pump, can it suck it from where ever the storage tank is ? Theres a second toothed belt running to the botom of the engine wonder what thats for ?
I rang them up on friday for some more info, there winch Guru was away. will try them next week for some more info.
Got some info on the milemaker Type R winch too,
The complete Type R winch with motor is £875 excluding VAT.
The cost to ship one to you would be £167.90.
Works out to about $1800 au
The quality of the RED winch is impressive will have a cat with them and sus out the best options
Thats for the type R Milemarker winch only.
Had a look on their web site they do a complete Pto system for 2450gbp about $4200 aud. The speed is comparable to a twin motor giglepin set up they reckon.
Had a look on their web site they do a complete Pto system for 2450gbp about $4200 aud. The speed is comparable to a twin motor giglepin set up they reckon.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
Who is online
Users browsing this forum: No registered users and 2 guests