Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Earth Lead

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Earth Lead

Post by greg »

Hi All,

Just wondering where the main earth lead should bridge between on an 88 Sierra?

I want to know about the one from the chassis to the engine, and the body to the battery.

Thanks,
Greg
DMA Founding Member #1 - Now Retired
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

20 views so far and no answers - geez - clearly i'm not the only one that didn't know the answer :)
DMA Founding Member #1 - Now Retired
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

On mine - The Battery to the body is about 200mm long and is connected to the shortest possible path to the firewall.

Engine Neg I think comes from the ??? Damn I forgot now. Try around the back of the dizzy housing to the firewall.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 10
Joined: Mon Feb 02, 2004 9:17 pm
Location: Churchill, vic

Post by Stickman »

On my old 85 there was a thin wire from the batt to the firewall and the thick wire from the batt to one of the bolts holding the starter on
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I replaced the wire from the battery to the firewall with much heavier stuff (about the same sort of size as the battery cable) There is also the factory wire from the battery to the block (on the intake manifold I think) There is another that I replaced that was quite fine wire (like speaker wire) with heavier stuff from the back of the distriubter to the firewall ....

Other than that .. I think I added one for the body to the chassis ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 437
Joined: Mon Nov 24, 2003 4:26 pm
Location: back in the bush ;)

Post by germo »

my 85 is same as described above. I did run massive cables to my amp and firewall.
I used 120mm square flexable cable.
I priced it at some stupid amount, but got it free from work.

I had probs with that blue and white powders collecting and destroying terminals, due to ellectrolosis or whatever they call it. vasso helped get a better connection and stop it.

if ur car has stock electrics then obviously the stock wire is ok. big amps cause trouble though.

I am rambling with crap again. sorry my bad. :oops:
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Post Reply

Who is online

Users browsing this forum: No registered users and 86 guests