Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gq f diff reinforcment
gq f diff reinforcment
hi iam putting together a gq wich iam going to compeat i have a f diff i would like to reinforce any one got any pics showing were it is best to reinforce
Re: gq f diff reinforcment
I've seen a kit on eBay (I think) which is pretty self explanatory. I've plated and reinforced mine but more due to repeated cracking rather than for comp use.bj56 wrote:hi iam putting together a gq wich iam going to compeat i have a f diff i would like to reinforce any one got any pics showing were it is best to reinforce
Try googling it and see what you get.
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
Re: gq f diff reinforcment
Maybe you should have a look over here:
http://www.superiorengineering.com.au/p ... 101a386afb
http://www.superiorengineering.com.au/p ... 101a386afb
'96 GQ Wagon, RD28T @ 13psi and now Intercooled, 2 3/4" straight through, 2.5" + 2" Lift, 33's, front detriot locker, 12,000lb winch, snorkel, etc...
Re: gq f diff reinforcment
yeh i reccomend the superior kits they look very strong and come with all the things to strengthen the tubes and gussets.. would be worth a look at least
"If you are gonna live life on the edge u better have some good balance"
Re: gq f diff reinforcment
Hi mate if you have the diff housing out of the car Mr sheetmetal in Nambour sunshine coast makes a kit and welds it all on for about $250. I had mine straightened and braced by him and after 3 years never bent it since.
Who is online
Users browsing this forum: No registered users and 1 guest