Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Belt slipping after a power upgrade.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 11
Joined: Thu Sep 03, 2009 8:02 pm
Location: Brisbane

Belt slipping after a power upgrade.

Post by 07luxurious »

I have a 06' Hilux D4D, have had a chip and 3" exhaust fitted, i carry about 300kg of weight constantly so the power upgrade has been very beneficial.
My dilemma is when taking of from a stand still, when the clutch is coming out to engage the gear the belt slips, only for a split second, but still enough to wonder what is causing this? the fan belt has been replaced only recently, and these hilux's have a spring loaded self tightening mechanism fitted stock to the belt system, any ideas from anyone? anything that could be done to relieve the issue?

HD Clutch maybe?
Posts: 273
Joined: Tue Jul 01, 2008 3:52 pm
Location: GREENBANK

Re: Belt slipping after a power upgrade.

Post by AZZA'S HJ47 »

replace the belt tensioner
hj47 ground up resto 2inch bodylift,2 inch suspension front and rear tjm Diff locks, arb bull bar,190l sub tank, turbo and intercooler set up would i do it again Yep
Posts: 280
Joined: Tue Feb 16, 2010 1:21 pm
Location: Werribee

Re: Belt slipping after a power upgrade.

Post by MrGrim »

there is a product called belt grip you can get it from most industrial machinery stores ..its in a spray can does a good job stoppin this

try this lin bout half way down green can
http://www.noelsautoparts.com.au/CRC%20Products.htm" onclick="window.open(this.href);return false;
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Posts: 34
Joined: Fri Jul 06, 2007 6:04 pm
Location: Gold Coast, Australia

Re: Belt slipping after a power upgrade.

Post by bansheebuzz »

dont use belt grip! that stuff is a pain and puts sticky shit everywhere, fix it properly, how many k's on the clock? the alternator clutch pulley are fairly common failure and could be on its way out, the will make a squeek noise
Posts: 11
Joined: Thu Sep 03, 2009 8:02 pm
Location: Brisbane

Re: Belt slipping after a power upgrade.

Post by 07luxurious »

115,000
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: Belt slipping after a power upgrade.

Post by RAY185 »

The problem has nothing to do with the clutch. How sure are you that the replacement belt is 100% the right length? Was it a genuine one? (assuming this problem started when the new belt went on?) If it's not the belt, as said, it will be something else on the belt circuit. Auto tensioner or any of the pulley bearings.
Posts: 34
Joined: Fri Jul 06, 2007 6:04 pm
Location: Gold Coast, Australia

Re: Belt slipping after a power upgrade.

Post by bansheebuzz »

if you read my post im refering to the alternator clutch pulley, not the clutch itself. the alternator pulley has a one way sprag clutch built into it
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: Belt slipping after a power upgrade.

Post by RAY185 »

bansheebuzz wrote:if you read my post im refering to the alternator clutch pulley, not the clutch itself. the alternator pulley has a one way sprag clutch built into it
I was actually referring to the original post where he is clearly referring to the clutch itself. I agreed with you with you that it will be a belt or pulley issue. ;)
Posts: 11
Joined: Thu Sep 03, 2009 8:02 pm
Location: Brisbane

Re: Belt slipping after a power upgrade.

Post by 07luxurious »

the belt was replaced 2 months before the power upgrade and was not heard up until the mod had been done.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest