Hey guys is a dual cab hilux tail shaft 84-88model the same as a single cab 88/89 model? really need help as mine is siezed..
Or if you know anyone that has a tailshaft to fit please let me know..
Thanks Trent
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux tail shaft
Moderators: toaddog, Elmo, DUDELUX
Re: Hilux tail shaft
Just goto a wrecker and measure it.
Why is it seized?
Sounds like it needs new uni joints thats all.
Why is it seized?
Sounds like it needs new uni joints thats all.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Re: Hilux tail shaft
ive called wreckers.. no one has any.. its the rear tailshaft where it slides in and out(2piece) there is no grease nipple at all so its never been greased in its life thats why its seized..
Re: Hilux tail shaft
Have you tried coating the slip joint with Inox then go 4wheel driving?
Who is online
Users browsing this forum: No registered users and 0 guests