Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6G 74 Running rough & popping thru exhaust

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 43
Joined: Fri Apr 24, 2009 7:23 pm
Location: New Zealand

6G 74 Running rough & popping thru exhaust

Post by nicinnz »

I have just bought a 1993 3.5 Pajero cause I wanted the bull bar. The truck is in great condition but is missing/running rough and popping thru the exhaust. The rear cylinders on the LH bank both have low compressions, about 80 psi, anyone struck this before? Blown head gasket, burnt valves, pistons? Truck has 200km on the clock wondering if I bother to patch it or at that kms would it need a total rebuild.?
NH SWB Pajero 3.0L manual, rear locker, 265/75R16 KL71's, snorkel
.
NT LWB Pajero Exceed, factory rear locker, colour coded 18" Rims
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: 6G 74 Running rough & popping thru exhaust

Post by -Scott- »

My first guess is head gasket failed between the two low cylinders. Second guess is crack in the head, but I would expect additional signs if that's the case.

I would say first step is to take the heads off and check things out - then work out what to do from there.

Best case, new gaskets & you're away. If it's a head problem, who knows? If it's a block problem, it's even worse.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 10 guests