I have recently fitted some 75 series front leaf springs into my GQ leafy. they give close to 4 inch of lift over standard and are 2 40mm longer than the standard which is good with extended shackles because it allows them to work properly. i got four 3 degree castor wedges as a start, 2 for the front to help correct the castor and 2 for the rear to try fix pinion angle on the tail shaft as the uni near the box is doing all the work! i have fitted the wedges to the rear and made the vibrations worse! yet to fit the front! 35's fit no dramas now without body lift or guard cutting which is what i wanted to achieve!
any suggestions on the castor ?
is there a way to know exactly how much it is out?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
75 series leaf springs in gq leafy
75 series leaf springs in gq leafy
An ounce of precaution is better than a ton of cure!
Who is online
Users browsing this forum: No registered users and 2 guests