intercoolers for td42 wich is best

[juzzy gq racing]

iv got to the stage of choosing wich intercooler to run there are so many types and brands to choose from like air to air water to air air to air with a thermo fan .which one would be best and if any one has info or has one and could tell me some good info on wich one to get would be a bargain i do not wanna spend over 1500 cheerz juz and iv herd water to air or that glyco set up is good for 4byn as there is sometimes no speed for wind flow for front mount coolers

[Dirty]

I ran a 10x6 PWR barrel cooler on the GU for around 8 months and have just swapped it off and put on a top mount, again PWR 500x300mm core.

I went away from the w2a setup because there is just that extra bit of complexity that was giving me the shits, and ultimately it wasn't worth all the hassle and to do correctly takes up a lot of engine bay space that I don't have.

Top mount IC isn't the most technically advanced option, and does have some drawbacks, but for the touring and off-road work I do suits my needs the best.

If you want to run the PWR barrel cooler I have it, and all the plumbing in the shed for the right price.

- David.

[Red Dog 4x4]

Just finsh building my A2W, and i have droped 150deg off the pyro temp and after working the car hard for half an hour the core is cold to touch.

Will get some photos soon

[ludacris]

My water to air kit just arrived from the states. I will take photos once it is fitted. What fluid is best to use for it.

Cris

[Dirty]

My water to air kit just arrived from the states. I will take photos once it is fitted. What fluid is best to use for it.

Cris

Cris,

Just use your normal anti-freeze, I also used my radiator overflow bottle as well.

There are high performance coolant products out there like http://www.engineice.cc/ and I think Rocket Industries sell a product called "50 Degrees Below" but I cannot find it on their web site at the moment. These products boast a 50oF or (10oC) reduction in radiator temperatures, but for the cost I couldn't justify it for that little improvement, which as the a2w cooler should be at much lower temperatures wouldn't even be as high as 10oC.

If you are doing a a2w it is important to have an expansion tank, and an overflow tank. These didn't come with the PWR kit and the system is useless without them. Also take care as to where you run the hoses and place the pump, as I placed mine out of the way, but they collected a lot of air pockets which ultimately killed the pump. I didn't get around to putting in an expansion tank/reservoir though which would deal with this to some degree. But shortest path is the best idea and not going to be to hard in a comp vehicle, with all the crap under the bonnet of the GU this was not a very "straight path".

- David

[ludacris]

My water to air kit just arrived from the states. I will take photos once it is fitted. What fluid is best to use for it.

Cris

Cris,

Just use your normal anti-freeze, I also used my radiator overflow bottle as well.

There are high performance coolant products out there like http://www.engineice.cc/ and I think Rocket Industries sell a product called "50 Degrees Below" but I cannot find it on their web site at the moment. These products boast a 50oF or (10oC) reduction in radiator temperatures, but for the cost I couldn't justify it for that little improvement, which as the a2w cooler should be at much lower temperatures wouldn't even be as high as 10oC.

If you are doing a a2w it is important to have an expansion tank, and an overflow tank. These didn't come with the PWR kit and the system is useless without them. Also take care as to where you run the hoses and place the pump, as I placed mine out of the way, but they collected a lot of air pockets which ultimately killed the pump. I didn't get around to putting in an expansion tank/reservoir though which would deal with this to some degree. But shortest path is the best idea and not going to be to hard in a comp vehicle, with all the crap under the bonnet of the GU this was not a very "straight path".

- David

Awsome thanks for the imput. Normal anti freze it is.

Cris

[Red Dog 4x4]

Were did you get your kit from Chris? frozenboost.com?

[juzzy gq racing]

how much you want for the w2a cooler mate

[ludacris]

Were did you get your kit from Chris? frozenboost.com?

Sure did. Prices are way cheaper and you can purchase using paypal so very secure shopping. Took about 7 days to arrive.

Cris

[Red Dog 4x4]

Yeah i know i have just finshed my set up, had to get a rad made by PWR and it cost more that the core and all the bits.

[Screwy]

Were did you get your kit from Chris? frozenboost.com?

Sure did. Prices are way cheaper and you can purchase using paypal so very secure shopping. Took about 7 days to arrive.

Cris

Which kit on that site did u get mate?

those prices look very very cheap with current exchange rate... hardly anymore then my front mount air to air im 3/4 of the way through......

Screwy

[Dirty]

how much you want for the w2a cooler mate

PM sent.

[ludacris]

Were did you get your kit from Chris? frozenboost.com?

Sure did. Prices are way cheaper and you can purchase using paypal so very secure shopping. Took about 7 days to arrive.

Cris

Which kit on that site did u get mate?

those prices look very very cheap with current exchange rate... hardly anymore then my front mount air to air im 3/4 of the way through......

Screwy

I went with the 350 hp kit but swapped from type 9 to type 16 intercooler also got the remote filler and hoses. I have a tank already. This should be good enough for family GU wagon running low boost.

Cris

[Screwy]

Were did you get your kit from Chris? frozenboost.com?

Sure did. Prices are way cheaper and you can purchase using paypal so very secure shopping. Took about 7 days to arrive.

Cris

Which kit on that site did u get mate?

those prices look very very cheap with current exchange rate... hardly anymore then my front mount air to air im 3/4 of the way through......

Screwy

I went with the 350 hp kit but swapped from type 9 to type 16 intercooler also got the remote filler and hoses. I have a tank already. This should be good enough for family GU wagon running low boost.

Cris

very

wish i looked there before i started doing my front mount air to air lol

[Red Dog 4x4]

I ended up getting the type 10 a custom rad 600x303x30mm core size, after the set up was finshed i have droped 150deg off the pyro after the turbo.

[ludacris]

I ended up getting the type 10 a custom rad 600x303x30mm core size, after the set up was finshed i have droped 150deg off the pyro after the turbo.

Nice. 150 is a big drop.

Cris

[Red Dog 4x4]

I know even after a really hard run pushing it for 30-45min the core is cold to touch, i didn't think it would work that well.

[love ke70]

im running a laminova intercooler, the EGT change was pretty massive, on the highway at cruise a change of 50 to 70 degrees, down to 230.
dunno what i dropped at full noise, but i went a full turn on the pump and its still cooler than it was.
talk to matt mcinnes on here about one, integrated into the manifold, its a great easy to use setup. cant suggest it enough


just as a point of note, why are people running antifreeze in their intercoolers?

anything you add to water reduces its heat transfer abilities, your engine only has corrosion inhibitor cause it had to, i cant see the point in running anything but plain water in an intercooler?

cheers, andy

[hulsty]

So it doesnt freeze would be one reason.

[matt.mcinnes]

So it doesnt freeze would be one reason.

Anti Freeze Anti Boil is only required where you have an issue with freezing, Glycol is 30% less efficient than water at transferring heat, So if you can only run a suitable anti corrosion inhibitor.

A water wetter may aid heat transfer too.

[Dirty]

just as a point of note, why are people running antifreeze in their intercoolers?

Once in a rush to head off for the weekend, I topped up with straight water, so was running about 1/3 normal anti-freesze mixture. 45oC that day and I boiled the water out of the system towing the camper.

- David.

[matt.mcinnes]

just as a point of note, why are people running antifreeze in their intercoolers?

Once in a rush to head off for the weekend, I topped up with straight water, so was running about 1/3 normal anti-freesze mixture. 45oC that day and I boiled the water out of the system towing the camper.

- David.

You boiled the water out of the intercooler?

[Dirty]

just as a point of note, why are people running antifreeze in their intercoolers?

Once in a rush to head off for the weekend, I topped up with straight water, so was running about 1/3 normal anti-freesze mixture. 45oC that day and I boiled the water out of the system towing the camper.

- David.

You boiled the water out of the intercooler?

Yup.

- David.

[love ke70]

well your intercooler and heat exchanger arnt working properly, you need a bigger heat exchanger, theres no point having an intercooler running above 100 degrees.

alot of factory fitted water to air coolers do this under extreme conditions

[matt.mcinnes]

well your intercooler and heat exchanger arnt working properly, you need a bigger heat exchanger, theres no point having an intercooler running above 100 degrees.

alot of factory fitted water to air coolers do this under extreme conditions

Have to agree, The heat exchanger is too small for the intercooler. Diesels spend 80% of the time on boost Petrol 10%, most intercoolers heat exchangers are designed to cope with petrol.

[jemmos]

sorry, off the topic of water to air. has any one used the ase front mount air to air coolers. if so any good??? dont want massive power, just something to keep the old egt cooler

[GU BOOST]

am running a type 18 frozen boost with biggest radiator could fit and twin thermos. Dead flat highway at hundred it sits on 210, 220 degs.

[UGOTNUFN]

am running a type 18 frozen boost with biggest radiator could fit and twin thermos. Dead flat highway at hundred it sits on 210, 220 degs.

With no load and probably next to no boost and fuel that would be expected

[vanbox]

sorry, off the topic of water to air. has any one used the ase front mount air to air coolers. if so any good??? dont want massive power, just something to keep the old egt cooler

Do you mean ARE? If so Im putting one in the front of my truck. Ill let you know how it performs. VERY well constructed.

[8maddog8]

Does anyone know what kind of intake temps they are getting after fitting a intercooler? Be it w2a (frozen boost, laminova, etc) or a2a (top and front mount).