Hi guys
dose any body know where i can get a foward facing adaptor for the gas research throttle body to manifold for a carby 4.2?
i have tried gas research and they can only supply the standard adaptor that faces the passanger side.
cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GAS RESEARCH ADAPTOR
Re: GAS RESEARCH ADAPTOR
They are confused between a 2bbl and 4bbl adapter. 4bbl V8 adapters go left and right, the Gasresearch Nissan TB42 adapter faces either forward or rearwards, they are milled on an offset angle so will lean into or away fron the head about 5 degrees.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Re: GAS RESEARCH ADAPTOR
thats right on the TB42 you can face it either way, i had one and ran it forwards no dramas,
Re: GAS RESEARCH ADAPTOR
Got one off gas research about 3 months ago think it was like 80 bucks. like joel said they face forward or rearward. wouldnt be hard to make one if you were handy on the tools
Re: GAS RESEARCH ADAPTOR
cheers for the reply guys.
sh1ty, would you have a part number or anything so i can ring gas research and order 1? i rang 1 of there fitters today and he said he would be able to help me with a base plate and an adaptor but he thought it would be around the $250 mark. as im trying to do this mod on a cheap budget i dont want to get ripped off.
cheers.
sh1ty, would you have a part number or anything so i can ring gas research and order 1? i rang 1 of there fitters today and he said he would be able to help me with a base plate and an adaptor but he thought it would be around the $250 mark. as im trying to do this mod on a cheap budget i dont want to get ripped off.
cheers.
Re: GAS RESEARCH ADAPTOR
nah sorry mate i dont have a part number. i just asked for a 90degree bend to suit there throttle body and a tb42 inlet. not 100% on the price but 80 bucks just rings a bell. that was from gas research in melbourne
Who is online
Users browsing this forum: No registered users and 146 guests