After going through bout 6 cv's it the last 12 months i have finally broken something different. On a trip on the weekend the rear axel studs went bang, destroying the rear hub at the same time. Looking for advice on how to upgrade, i have heard that the best option is going with 100 series studs, looking for advice from anyone that has had this problem and overcome it .
Cheers Ash
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear axel stud upgrade for a 75
Moderators: toaddog, Elmo, DUDELUX
Re: Rear axel stud upgrade for a 75
I've seen quite a few drilled and tapped and used high tensile bolts to hold the axle in. never seen one of these fail or cause issues.
Re: Rear axel stud upgrade for a 75
Have a read of this link. Beware that the stubs can work lose with out the cone washer. I use 3/8 cup head bolts in mine with locktie keeping them in.
http://forum.ih8mud.com/hardcore-corner ... te-up.html" onclick="window.open(this.href);return false;
http://forum.ih8mud.com/hardcore-corner ... te-up.html" onclick="window.open(this.href);return false;
TEAM TONKA
SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
Who is online
Users browsing this forum: No registered users and 0 guests