Suzuki ute pics

[Guy]

I think you may have a few issues with your steering box .. I know liquid nails seemed like a good idea at the time .. I have been tempted to use it myself But sometimes you really need to use high tensile bolts

[zookieboi]

these are mine the first one is my current one and the second one is my old one very similar setups just love them!!





and my old one

[gu town]

mine has 4 seat ute on the compliance plate.

your car has a plate that says it complies to something?????? did you make the plate yourself?!

[supazuk]

mine has 4 seat ute on the compliance plate.

your car has a plate that says it complies to something?????? did you make the plate yourself?!

yep, sure did. do you want one for your ex Victorian POS

[zookieboi]

here's mine and its not for sale.

Nice rig. What size tires you running?

Looks like your rear axle has been moved back?

[Spike_Sierra]

Its had the rear 300mm or so cut off the chassis which might make it look like the axle has been moved back.

[Gwagensteve]

Spike - that axle has been moved back, but it's all been done with the springs. See how much of the spring is visible in front of the rear wheels? On a stock sierra an equal amount of spring will be visible fore and aft of the tyre.

I'm not convinced the chassis has been cut but I could be wrong.

Steve.

[mr green]

Spike - that axle has been moved back, but it's all been done with the springs. See how much of the spring is visible in front of the rear wheels? On a stock sierra an equal amount of spring will be visible fore and aft of the tyre.

I'm not convinced the chassis has been cut but I could be wrong.

Steve.

your right steve. the rear was moved back using mazda springs with a custom top leaf. i believe the chassis had a minimal amount trimmed off. and yes the tray has had about a foot taken off.
i love this ute. reliable, practical and i don't think he has ever broken a thing. and best of all its still a ute. still capable of taking a wheely bin to the tip or a load of wharever for the garden.. did i say i love this ute

[lay80n]

My brothers chopped SWB ute.
RUF, lux fronts in rear. SPUA flat springs with 33 boggers. 2 inch BL. Commodore shocks up front and hilux rear shocks inboarded.





Layto....

[mrRocky]

er... my trayback as pictured above, is no longer a trayback - that is all

[Spike_Sierra]

Spike - that axle has been moved back, but it's all been done with the springs. See how much of the spring is visible in front of the rear wheels? On a stock sierra an equal amount of spring will be visible fore and aft of the tyre.

I'm not convinced the chassis has been cut but I could be wrong.

Steve.

Yeah Steve, had another look at it and you are right. I think i am getting confused with the LWB tub chassis and the LWB ute chassi regarding the chop.

I like the look of it, I personally wouldnt have shortened the tray as it looks a little stumpy IMO. I love everthing else though. I am not a fan of flat trays without sides, it just seems to defeat the purpose, as it just means you have to tie everything down.

[Gwagensteve]

I agree that tray looks a bit short. It could have been a plank longer (6") without hurting capability and it would have made the car look more balanced.

Steve.

[Dominator]

[redzook]

...

if thats the ute i am thinking of it has gone through a few hands since benny built it and moved quite a distance

[hillbilliywheelchair]

er... my trayback as pictured above, is no longer a trayback - that is all

you need to bob that tub mick

[redzook]

my old shitta

[11_evl]

its a ute if a dog can sit on the back right???

[Rhett]

Mine a long time ago

[Turbo Tonka]

redzook,that is the same old zuk of bennys your talking about.then aerens,now dominators rig.has had about ten attempts at rebuilds over the years and finally is quite the zuk.

2 tamworth zuks in the one thread,probably the only good thing to come from here.
Used to love that thing rhett,about as much as the new toy

[phils.zook.on33's]

Her's mine

[iantt]

Newly purchased..

[V.W.Dave]

Honestly there are some really good looking rigs coming out of the woodwork here. Keep the pics coming guys....

[UAV]

^
1. Not a ute
2. it looks like if you brake too hard you will flip over

[bakerboy]

our budget build zook ute
before (of course we forgot a full vehicle shot )





after

[bakerboy]

^
1. Not a ute
2. it looks like if you brake too hard you will flip over

he's proper fucked if he gets a flat

[v840]

I like the out-of-the-box approach on the front guards bakerboy. Something different.

[GRPABT1]

Love the custom shackle reversal, think you went a bit overboard on the front towers though and approach angle has suffered as a result.

[bakerboy]

I like the out-of-the-box approach on the front guards bakerboy. Something different.

The gaps will be filled with some ali checker plate, good move? i just dont like seeing the gap

possibly GRPABT1, but its our first build, steep learning curve, and as its still SPUA we can go SPOA and halve the "fangs" if need be not totally stoopid

[GRPABT1]

I like the out-of-the-box approach on the front guards bakerboy. Something different.

The gaps will be filled with some ali checker plate, good move? i just dont like seeing the gap

possibly GRPABT1, but its our first build, steep learning curve, and as its still SPUA we can go SPOA and halve the "fangs" if need be not totally stoopid

Yeah I wanna do something very similar one day SPUA custom reverse shackle on custom leaves. Just need to find the time and money

[V.W.Dave]

^
1. Not a ute
2. it looks like if you brake too hard you will flip over

On the rego papers most sierras are utes.