Hi, got a factory locker spare diff at home and want a reliable rear locker. I have heard of a few people that have converted the vacume operation of the locker to air lockers. cost approx 200 for 2 solinoids and vented body for the solinoids.
Was wondering if anyone has done something similar and has more details about it?? Where to get parts from ect.. I do not have blokes number but have seen his set up before. Any help would be awesome....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
converting a factory rear locker to air locker
Road Ranger
Re: converting a factory rear locker to air locker
I haven't heard of converting to air, I imagine using the vac actuator with compressed air would be hard to regulate and you would end up blowing it out, search in the bible there is tech on using after market solanoids in the vac setup, I used a mag dual solanoid housing on mine with vac reliably, far quicker than factory, parr number and set up is in the threads in the bible, make sure you weld a fram around the actuator as they are very prone to damage
If the above post did not offend you in any way please PM me so I can try harder!!
Re: converting a factory rear locker to air locker
Cheers mate,will do.
Who is online
Users browsing this forum: No registered users and 1 guest