Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4inch Gq
4inch Gq
just installed a tough dog 4inch lift and 35 silverstone extremes.
Im a little worried about how it looks a little top heavy. I'm thinking I would like to make it a little more stable to suit my driving style.
I would like others advice, I was thinking of fitting my swaybars back in with disconects and maybe some wheel spacers.
will this sufice? other options I had in mind was 10inch rims. How do all the guys with big Gq's keep them upright?
Im a little worried about how it looks a little top heavy. I'm thinking I would like to make it a little more stable to suit my driving style.
I would like others advice, I was thinking of fitting my swaybars back in with disconects and maybe some wheel spacers.
will this sufice? other options I had in mind was 10inch rims. How do all the guys with big Gq's keep them upright?
Re: 4inch Gq
As for sway bars, my car already has factory disconect lever. Is this enough and can the factory disconect be extended to suit 4inch lift? As i've only seen the supirior ones and they look like they wont work with facory set-up.
What are peoples thorts on wheel spacers?
What are peoples thorts on wheel spacers?
Re: 4inch Gq
Wheel spacers are illegal in QLD but so are 4"lifts, they put extra stress on the studs etc... A bigger offset rim will help for sure, bear in mind you are much more likely to pop a bead on a 10" rim over and 8" rim. Re-fit your swaybars or get a high quality one with disconnects. Are you in QLD or NSW or?
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Re: 4inch Gq
hey mate the general rule of thumb for a sturdy truck, is for every inch you go higher you want t go 3 inches wider. this is not always achieveable. yes swaybars will dramatically help, but you need some good quality disconnects, ive fitted some good quality snake racing disconnects, and they last and work really well if they are kept well lubed. hope this helps
"If you are gonna live life on the edge u better have some good balance"
Re: 4inch Gq
definitely keep your rear swaybar at least. don't worry about disconnects for the rear either.
Re: 4inch Gq
Moved to Nissan.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Re: 4inch Gq
Thanks guys.
Is the factory disconnect enough or will an aftermarket disconect do a better job.
Was thinking superior eng 4inch disconects for front and make an extension for the rear and keep factory disconect.
Or should I just go all 4 superior?
If I was goin to use a wheel spacer, I'd only use the 6mm spacer from superior. Just for that little extra width.
I havnt driven it with the rear swaybar in yet as the 4wd shop that fitted my lift took it out instead of extending them.
Is the factory disconnect enough or will an aftermarket disconect do a better job.
Was thinking superior eng 4inch disconects for front and make an extension for the rear and keep factory disconect.
Or should I just go all 4 superior?
If I was goin to use a wheel spacer, I'd only use the 6mm spacer from superior. Just for that little extra width.
I havnt driven it with the rear swaybar in yet as the 4wd shop that fitted my lift took it out instead of extending them.
Re: 4inch Gq
The rear on a nissan has too much flex when compared to the front. The front is too stiff and forces the rear to do all the flexing. For a more stable truck that will still work nicely I'd get a good quality rear sway bar. It doesn't need to disconnect. It will force the front to work better and will give you much more stability. As for a front sway bar, I personally wouldn't bother but its up to you. I'd definately make sure it can be disconnected.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: 4inch Gq
Going to a stronger or heavier set of rear coils will also force your front into flexing better.
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Re: 4inch Gq
But this will make it skittish on corregations and the like if its too stiff. Good for slow stuff but not for normal driving or faster stuff. A decent rear sway bar is a much better option. If you want really good response then a currie anti rock type bar is definately the better option but will require fab work and will cost more.twodiffs wrote:Going to a stronger or heavier set of rear coils will also force your front into flexing better.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Posts: 115
Joined: Thu Aug 21, 2003 3:42 pm
Joined: Thu Aug 21, 2003 3:42 pm
Location: Moved ages ago, ifyou know me you'll know where
Contact:
Re: 4inch Gq
I put a set of rancho 9000's in my GQ with about 6" lift with 3" body lift. Just grab the adjuster dial and wind it all the way up to "slot car" for use on road. Less body roll than stock and no need for sway bars.
Steve
Steve
Re: 4inch Gq
But doing this degrades your suspension compliance to gain less body roll. Not good if you have rough roads. It changes how your shocks react to the road surface and if you go over a rough surface (plenty around where I live) then the car will lose traction on the road and may cause more problems than having a bit of body roll. The car will effectively skid a lot sooner. If you have a properly set up suspension it will provide good grip on road (depending on tyres) and will still be compliant off road.Steven wrote:I put a set of rancho 9000's in my GQ with about 6" lift with 3" body lift. Just grab the adjuster dial and wind it all the way up to "slot car" for use on road. Less body roll than stock and no need for sway bars.
Steve
Making your springs or your shocks stiffer isn't the answer. Making your suspension work properly is.
And before you question me, I also have ranchos on my shorty.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: 4inch Gq
Ok, So heres what i have in mind, An aftermarket rear sway bar with 4" disconects and throw the front swaybar in the bin.
Who Is making a good rear sway bar for a GQ? Can you get a bolt in replacement or will all of them require Fab work?
Who Is making a good rear sway bar for a GQ? Can you get a bolt in replacement or will all of them require Fab work?
Re: 4inch Gq
Find a stock one and make or buy extensions for it. I'd try it first, if you don't like it then consider going to a custom bar.
You'll get the swaybar for free, or next to nothing.
Make the extensions, pay someone to do it, or worst case scenario, buy some disconnects to suit the lift.
I have extended disconnects on mine but I leave them hooked up all the time.
You'll get the swaybar for free, or next to nothing.
Make the extensions, pay someone to do it, or worst case scenario, buy some disconnects to suit the lift.
I have extended disconnects on mine but I leave them hooked up all the time.
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
Re: 4inch Gq
I had a 4" lift + 2" BL and 33" tyres and it drove perfect on road with very little body roll (no sway bars fitted.
We used this vehicle on outback trips with corrugations as well as high country trips.
If your springs and shocks are matched right it should be fine.
Otherwise use your std rear sway bar and use extended linkages similar to these:
We used this vehicle on outback trips with corrugations as well as high country trips.
If your springs and shocks are matched right it should be fine.
Otherwise use your std rear sway bar and use extended linkages similar to these:
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Re: 4inch Gq
I am using GU swaybar in my SWB they bolt in.showtime393 wrote: Who Is making a good rear sway bar for a GQ? Can you get a bolt in replacement or will all of them require Fab work?
Nitto Mud Grapplers, Lockrite, 4.3s, Trail Ready BL, PTO, High pinion rear,Gu diff with Buds Customs armour and heaps of Superior gear, 24% Reduction .
Re: 4inch Gq
ive got a two inch spring and 2inch body in my wagon running 36peeds i kept the standard rear and threw the front away and i am happy in the way it drives both off and on road. the best thing is it dosent cost anything it took about 15mins. oh and beed locks good luck
Who is online
Users browsing this forum: No registered users and 1 guest