Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how to stop early zd30 goin boom
how to stop early zd30 goin boom
Ok ive got a 2000 gu patrol 5spd with a ZD30 in it. It has gone boom already just wondering what i should do while rebiulding it to make it last, its only a tow car for my gq/daily driver and is bog stock. I was thinking 3inch exaust, engine oil cooler and new injectors while doin the rebiuld. Thoughts would be great cheers. Put a td4.2 in it is nt in the budget.
Blown ls1 GQ winch truck. and GU tow car / daily
Re: how to stop early zd30 goin boom
get rid of teh Patrol ZD30 and go the Navara ZD30 with its standard wategate Turbo setup, doesn't seem to have any problems like the GU ZD30.
AA's for Quitters
Re: how to stop early zd30 goin boom
If you have a dig around (as i'm sure you have), you'll find that the actual hardware side of the ZD30 is quite good, but they are really let down by poor management, ie. fuel and boost.
Have a look around on here and patrol4x4.com, as one of the two sites has a "make your ZD30 bulletproof" checklist on it.
Some basic items i'd suggest:
- Get a quality pyro gauge
- Get a quality boost gauge
There are a few other mods like PCV mods, fitting better quality components to the boost control side of things, and also fitting a decent oil catch can.
Have a look around on here and patrol4x4.com, as one of the two sites has a "make your ZD30 bulletproof" checklist on it.
Some basic items i'd suggest:
- Get a quality pyro gauge
- Get a quality boost gauge
There are a few other mods like PCV mods, fitting better quality components to the boost control side of things, and also fitting a decent oil catch can.
Re: how to stop early zd30 goin boom
I always thought they went boom because of a lack of oil to the piston skirts. I think the later model engines had modified piston galleries to lubricate this area better.
Don't take life too seriously...it isn't permanent.
Re: how to stop early zd30 goin boom
High EGT's from overfuelling was the cause for most holed pistons IIRC, and no doubt high EGT's and high boost is the cause of a lot of turbo failure too. Excessive blowby reads as fuel, ECU adds boost to compensate for extra "fuel", more blowby is created etc. etc.BadMav wrote:I always thought they went boom because of a lack of oil to the piston skirts. I think the later model engines had modified piston galleries to lubricate this area better.
I'm sure one of the guru's can add/correct this - whitiepatrol4x4 off here is a bit of a ZD30 fan and knows the mods needed to save them.
Re: how to stop early zd30 goin boom
I know of at least one ZD30 Navara that went boom also.......
And blew two turbos before that
But other than that I can only agree with the things already mentioned,
Boost and EGT gauges, at least you know once something is wrong and you can back off/shut down.
Other ZD30 owners will add, check patrol4x4.com, wealth of knowledge on ZD30s there.
And blew two turbos before that
But other than that I can only agree with the things already mentioned,
Boost and EGT gauges, at least you know once something is wrong and you can back off/shut down.
Other ZD30 owners will add, check patrol4x4.com, wealth of knowledge on ZD30s there.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Re: how to stop early zd30 goin boom
We have 1 at work we brought it after it had gone boom number three piston let got my father also has one hasn't gone bang but it was getting low on power we how out the the mass air flow meter in the zd30 after it has done a few kms get shit on them and give a false reading running the engine lean and I don't no why but number 3 piston seems to be the one that lets go.
If you haven't changed the air flow meter it will go bang again sooner rather than later . You will find you will get more power back when you put a new one on. I would change the air flow meter ever 50 to 100 thousand or if you fell you have lost power. It worked on both zd30s we have.
If you haven't changed the air flow meter it will go bang again sooner rather than later . You will find you will get more power back when you put a new one on. I would change the air flow meter ever 50 to 100 thousand or if you fell you have lost power. It worked on both zd30s we have.
Who is online
Users browsing this forum: No registered users and 142 guests