Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sierra 13b conversion
Sierra 13b conversion
Does anyone know of anyone that has put a 13b rotory into a Sierra and wot gearbox was used for the conversion.
Re: Sierra 13b conversion
I have only seen 3 one of them was on youtube the others were in buggies. There is always much debate on this subject I personally think they are a great engine and they have there place but I would never put one in a four wheel drive that wasn't a buggy. Most I have read up on run the RX 5 speed behind them then through a geared sierra transfer.
If you get on Auszookers.com there is a guy building one and he has a build up thread on it.
If you get on Auszookers.com there is a guy building one and he has a build up thread on it.
Re: Sierra 13b conversion
cheers mate, i have the same question up on there and got posted the link 4 the build.
Re: Sierra 13b conversion
Doing a 12A, just rebuilding motor, left room for the 20mm stretch later on.
Buildup thread to be done too. Cold here, probably a good time to start that now the zook is too tall for the shed.
Chris.
Buildup thread to be done too. Cold here, probably a good time to start that now the zook is too tall for the shed.
Chris.
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Who is online
Users browsing this forum: No registered users and 92 guests