Does anyone have quick fix wheel spacers, or the availability of longer studs so I can make some with the plasma cutter...
I know the pro's and cons - not trying to open that conversation, they'll be on a comp truck and need to widen the track a little more to clear the tyres from the rear coil mounts on full flex...
If someone has some (a pair would do) or knows where I can get them then that would help.
Cheers
G
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wheel Spacers and/or longer studs..
Moderator: Micka
Re: Wheel Spacers and/or longer studs..
I'm guessing Rovacraft or karcraft, at least phone and try. Karcraft are a Bearmach agent, Bearmach supply spacers.
Otherwise you could knock the old studs out and use some socket head capscrews lightly tacked into the back of the hub.
I used to get this done on race cars when i wanted to run larger than standard spacers. I would only use SPS Unbrako or Holokrome though, beware of all the Chinese fasteners on the market these days.
I'd knock out the old ones and press the newbies in and get a mate to tack TIG the heads.
Otherwise you could knock the old studs out and use some socket head capscrews lightly tacked into the back of the hub.
I used to get this done on race cars when i wanted to run larger than standard spacers. I would only use SPS Unbrako or Holokrome though, beware of all the Chinese fasteners on the market these days.
I'd knock out the old ones and press the newbies in and get a mate to tack TIG the heads.
300Tdi Defender 130 CC
Who is online
Users browsing this forum: No registered users and 0 guests