Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Next month i will be buiyng some new rubber and was looking at 35's. Now i have 33's on it and when the wheels are turned there is some space but not much. So will 35s fit and there will be millimeters when wheels are turned or i will need to buy spacers?? Because if i can i would want to run 35s
Cheers
1994 3.0v6 auto, 2inch suspension, 3inch body lift, 4.5t winch, snorkel, roof rack, Factory locker,33x12.5x15 mud tyres, and lots of lights.
Next month i will be buiyng some new rubber and was looking at 35's. Now i have 33's on it and when the wheels are turned there is some space but not much. So will 35s fit and there will be millimeters when wheels are turned or i will need to buy spacers?? Because if i can i would want to run 35s
Cheers
With you three inch body lift I would say you would OK .. you may need to get friendly with a BFH to make some minor clearances ..
(BFH Big F-ing Hammer)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
I've got 35's on my '94 and really big 35x13.5's (as tall as most 36's) on my '99, both only have only a 2" body lift and i rolled the fenders with a pipe instead of the hammer method for the most part. They barely scrub, when i had a 2" suspension lift on my '99 they didn't rub at all but i took that out for a better CG.
hi i have 35" x12.5" and thay do not hit but i have 2" body lift & 2" suspension but not happy with it off road so them go to do a solid axle swap and a 4" lift but they well fit just you well not have much down travel
