Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Got a 94 GQ coil cab (Petrol) ute which has dropped a tooth in the rear and is well on it's way to making some gravy out of my centre !!!
Have been told there's about 5 different Ratios for the GQ and have had a good look around through older posts and the bible but can't find anything specific.
Are the ute centres the same as the wagons?? SWB vs LWB?? is the major variance between the ratios purely to do with cubes/fuel/transmission??
if you look on your firewall at the compliance plate it will say trans axle code the after that hg41 or some thing like that.the 41 means 4.1 ratio.
it may say hg39,hg41,hg43 or hg46 there are the more common ratios.
!!! 